devention DEVO F12E User Handbook Manual page 67

Throttle Curve
Channel
Position
Exponential
Point
Status
Output
Throttle Stick
Throttle
Pos 0
Off
Point - 1
16.5%
Inhibit
0.0% 0.0%
Throttle Curve
8
g
Channel
Position
Exponential
Point
Status
Output
Throttle Stick
Throttle
Pos 0
Off
Point - 1
Inhibit
16.5%
Inhibit
0.0% 0.0%
Throttle Curve
Position
Exponential
Point
Status
Output
Throttle Stick
Switch
1
Pos 0
Off
Point - 1
Inhibit
16.5%
Inhibit
Pos 0
0.0% 0.0%
Switch
And
© Flight Mode 0
oO
FMOD 1
oO
FMOD 2
© Flight Mode 3
© Flight Mode 4
© Flap Normal
© Flap Midpoint
ciXention
DEVO Fl 2E
Welcome to use the DEVO F12E transmitter
(3) Exponential setting
Press UP or DN in the "Throttle Curve" setting interface to select "Exponential" setting, Press R or L to set
"Off' or "On". Select On for smooth changes, and Off for changes in the form of fold ling in throttle curve,
respectively.
(4) Curve setting
Including "Point" and "Output ".
(4.1) Point setting
Press UP or DN in Throttle Curve
interface to select Points setting.
Press R to expand a list including
seven points: "Point-L", "Point-1",
"Point-2", "Point-M", "Point-3", "Point-
4" and "Point-H". Press R or L to
select the point you want to adjust.
Throttle Curve
g
Throttle Curve
g
Channel
Position
Exponential
Point
Output
Throttle Stick
Throttle
Pos 0
Off
0.0%
Inhibit
Channel
Position
Exponential
Point
Status
Throttle Stick
Throttle
Pos 0
Off
Point -1
Inhibit
Inhibit
0.0% 0.0% 0.0% 0.0%
(4.2) Status setting
Press UP or DN to move navigation mark to Status and press R or L to
choose Inhibit or Active. Select Inhibit if keeping the current value(the
default setting is Inhibit). Select Active for changing the above points'
value.
Note: After select point -L or Point-H, the status setting won't be display.
Throttle Curve
1
Channel Throttle
Position Pos 0
Exponential Off
Point Point - 1
Status
Inhibit
Output MEM =
Throttle Stick Inhibit
0.0% 0.0%
(5)
Throttle Stick setting
The switch between Pos 1 and Pos 0 can be freely realized through
throttle stick after the below amount has been set up. The below set
amount is the position of throttle stick as well as the switch point.
Throttle Stick setting: Press UP or DN to select Throttle Stick seting,
Press L to decrease the amount with a lower limit of 0.0% or Inhibit,
Press R to increase the amount with an upper limit of 100.0%.
(4.3) Output setting
There is a expand item "Output" after select Status Active, press UP or
DN to select Output setting, press R or L to increase or decrease,
respectively, the output value. The adjustable range is from 0.0% to
100.0%.
(6) Switch Selection
When the item Throttle Stick is set in Inhibit, it is possible to switch between Pos 0 and Pos 1 by Switch.
Press UP or DN to select "Switch".
Press ENT to enter Switch interface,
press UP or DN to choose desired
item. Press ENT to confirm, the
desired item whose left side will be
changed into "1" from "0". If two or
more items are selected, the item
And should be selected, whose left
side should be changed into "1" from
"0". Press EXT after finished it.
DEVO F I 2E —67