Device Select - devention DEVO F12E User Handbook Manual

deOention
DEVO Fl 2E
Welcome to use the DEVO F12E transmitter
Press UP or DN to inhibit channel in navigation mark, and press R to
expand the menu.The channel includes four items: Elevator, Aileron,
Throttle and Rudder. The factory default is Inhibit. Take Elevator for
example.
Stick Position Switch
Off
Switch SPSO SW
Channel Elevator
Position OP
On Up
Stick Position Switch
2
Off
Switch SPSO SW
Channel
Position 0%
On Up
Press R or L to choose the Elevator as stick, then Press UP or DN to
move nagivation mark to value of position. It's possible to adjust the stick
position via pressing R or L.
Press UP or DN to navigate the On setting, press R or L to change the direction of the channel stick.
Stick Position Switch
Off
Display of stick position switch status
Switch
SPSO SW
Channel Elevator
Moving the stick to make sure that the direction of stick's turn-on or
Position 0%
turn-off position is correct.
On
After finished the setting, press EXT to exit.
2.9 Device select
This setting can help you configure various functional switches, or adjust levers. It includes Flight Main Switch,
Flight Extra Switch, Stunt Trim, Hold Switch, Hovering Pitch, Hovering throttle.
Press ENT to enter Main Menu, press UP or DN to move navigation mark
to select Model menu. Press ENT to enter Model menu. Press UP or DN
to Device select Option. Press ENT to Device select Option interface.
Device Select
Flight Main Switch
FMOD SW
Flight Extra Switch
(1) Flight Main Switch:
Press UP or DN to move navigation mark to Flight Main Switch and press
R or L to select the desired switch. The factory default setting is FMOD
switch.
Inhibit
Stunt Trim
Common
Throttle Hold Switch
RUDD D/R
(2) Flight Extra Switch:
Press UP or DN to move navigation mark to Flight Extra Switch and press R or L to select the desired switch.
The factory default setting is Inhibit.
(3) Stunt Trimt:
There are two modes: Common and Flight Mode. In Common Mode all the trim values, which various sticks
are corresponding to, put equal! effect on all the flight modes.ln Flight Mode, the trim value, each of which
stick is corresponding to, puts independent effect on the corresponding stick. The factory default setting is
Common.
Press UP or DN to choose the Stunt trim, press R or L to select "Common"or "Flight Mode", the factory default
setting is "Common".
(4) Throttle Hold Switch: Refer to "(1) Flight Main switch"
(5) Hovering pitch: Refer to "(1) Flight Main switch"
(6) Hovering throttle: Refer to "(1) Flight Main switch"
After finishing the setting, press EXT to exit.
DEVO Fl 2E —25