Table of Contents
Advertisement
Power Amplifier
+20 dBm
+15 dBm
V
+10 dBm
+5 dBm
0 dBm
-5 dBm
ciXention
DEVO Fl 2E
Welcome to use the DEVO F12E transmitter
(6) Twin Engine
This function can be set as twin engine output to meet the requirment for the models, which are powered by
twin engines.
(6.1) Twin Engine setting:
Press UP or DN to select "Twin Engine" setting, press R or L to choose the desired channel in the menu with
Inhibit and the inhibited channels previously set in "Device Output".
(6.2) Trim Setting:
Press UP or DN to select "Trim
Channels" setting, press R or L to
choose the item that you want to
select as trim lever in the menu with
Inhibit, Left trim, Right Trim, AUX4
KB, AUX5 KB, AUX6 KB, and AUX7
KB. After the setting, press EXT to
exit.
Wing Type
Wing Type
Wing Type
Normal
V-Tail
Inhibit
Dual Channels
Elevator
Mate
AUX4
Trim
Inhibit
Twin Engine
AUX5
Trim
Inhibit
Wing Type
V-Tail
Dual Channels
Mate
Trim
Twin Engine
Trim
Normal
Inhibit
Elevator
AUX4
Inhibit
AUX5
'MEM
(6.1) Twin Engine setting
(6.2) Trim Setting
Attention: Trim can only be enabled after starting Twin Engine.
2.12 Power Amplifier
The transmission output power of DEVO F12E is adjustable. It is divided into six grades from small to big.
The lower the transmission output power transmits, the shorter the radio range is, and the longer the stand-
by time will be, the higher the transmission output power, the farer the radio range, and the shorter the stand-
by time. Choose the appropriate transmission output power according to the actual situation.
Press ENT to enter Main Menu, press UP or DN to move navigation mark to Model Menu. Press ENT to
enter Model Menu. Press UP or DN to select Power Amplifier and press ENT to enter Power Amplifier interface.
Press UP or DN to choose the desired output power value. Press ENT
to confirm then the corresponding items will have "V"mark in front of
the items.
After the setting, press EXT to exit.
Grade 6
Grade 5
Grade 4
Grade 3
Grade 2
Grade 1
20dBm
15dBm
1 OdBm
5dBm
OdBm
-5dBm
2.13 Fixed ID
This setting will bind DEVO F12E with its receiver in a unique corresponding relationship. It will greatly speed
up the time of automatic binding when DEVO F12E powered on.
(1) Setting for fixed ID
The setting for fixed ID should be under the status that automatic ID binding is successfully finished. Below
is the setting method.
Press ENT to enter the main Menu and press UP or DN to move the navigational mark to select Model menu.
Press ENT to enter Model Menu. Press UP or DN to select Fixed ID and press ENT to enter the Fixed ID
setting interface.(Fig. 1)
If you want to activate the fixed ID settings, press R or L to change the status from off to ON. A series of
random digits will be shown below after change to On. (Fig. 2)
Press UP or DN to choose the ID code setting, press R or L to choose the digits,press UP or DN to move to
the next code setting . there are 6 digits can be setted. (Fig. 3)
DEVO F I 2 E —
60
Advertisement
Table of Contents
