Table of Contents
Advertisement
Power Amplifier
+20 dBm
+15 dBm
+10 dBm
+5 dBm
0 dBm
-5 dBm
Fixed ID
Fixed ID
ID Match
Fixed ID
cleention
DEVO Fl 2E
Welcome to use the DEVO F12E transmitter
Press UP or DN to choose the desired output power value. Press ENT
to confirm then the corresponding items will have "V"mark in front of
the items.
After the setting, press EXT to exit.
Grade 6
Grade 5
Grade 4
Grade 3
Grade 2
Grade 1
20dBm
15dBm
10dBm
5dBm
OdBm
-5dBm
2.13 Fixed ID
This setting will bind DEVO F12E with its receiver in a unique corresponding relationship. It will greatly speed
up the time of automatic binding when DEVO F12E powered on.
(1) Setting for fixed ID
The setting for fixed ID should be under the status that automatic ID binding is successfully finished. Below
is the setting method.
Press ENT to enter the main Menu and press UP or DN to move the navigational mark to select Model menu.
Press ENT to enter Model Menu. Press UP or DN to select Fixed ID and press ENT to enter the Fixed ID
setting interface.(Fig. 1)
If you want to activate the fixed ID settings, press R or L to change the status from off to ON. A series of
random digits will be shown below after change to On. (Fig. 2)
Press UP or DN to choose the ID code setting, press R or L to choose the digits,press UP or DN to move to
the next code setting . there are 6 digits can be setted. (Fig. 3)
Fixed ID
2
Status
(Fig. 1)
Fixed ID
2
Status
ID Code
129965
(Fig. 2)
Fixed ID
2
Status
On
ID Code
29965
(Fig. 3)
Press ENT key after the new ID has been setted. An inquiry interface of "Are you sure?" pop up. "ID Code
Matching ... ..." will be shown after press ENT. After matching, the interface will be returned to Model Menu.
(2) Fixed ID cancellation
Insert the assorted BIND PLUG into the output terminal of BATT before the
receiver is powered on, and then plug 5V DC power into other output terminal.
The red light of receiver will flash slowly. This means the fixed ID code has
been cancelled. Pull out bind plug. DEVO F12E also needs to make relative
cancellation and revision after the fixed ID in receiver is cleared out.
DEVO Fl 2E — 95
Advertisement
Table of Contents
