Table of Contents
Advertisement
(4.2) Speed Unit
Press UP or DN to select the Speed
Unit on the GPS setting interface
and it includes knots and km/h and
relative. Select the desired item.
d
eOention
DEVO Fl 2E
Welcome to use the DEVO F12E transmitter
g
GPS Setting
g
GPS Setting
Knots
Altitude Type
Absolute
Speed Unit
Date Type
DD-MM-YY
Time Zone
UTC+08:00
Km/h
Altitude Type
Absolute
Speed Unit
Date Type
DD-MM-YY
Time Zone
UTC+08:00
(4.3) Date Type
Press UP or DN to select the Date Type on the GPS setting interface and it includes DD-MM-YY,MM-DD-
YY and YY-MM-DD. Select the desired item.
Reverse Switch
Elevator
Aileron
Throttle
Rudder
Gear
Pitch
Gyro
AUX3
EZ2=10
Normal
Normal
Normal
Normal
Normal
Normal
Normal
Reverse Switch
Elevator
Aileron
Throttle
Rudder
Gear
Pitch
Gyro
AUX3
Normal
Normal
Normal
Normal
Normal
Normal
Normal
Normal
Travel Adjust
1
Elevator
Aileron
Throttle
Rudder
U100.0%
D100.0%
L100.0%
R100.0%
H100.0%
L100.0%
L100.0%
R100.0%
GPS Setting
GPS Setting
Altitude Type
Absolute
Altitude Type
Absolute
(4.4) Time Zone
Speed Unit
Knots
Speed Unit
Knots
Press UP or DN to select the Time
Date Type
DD-MM-YY
Date Type
DD-MM-YY
Zone , press R or L to set the
Time Zone
UTC+08:00
Time Zone
desired Time Zone.
UTC+08:00
(4.3) Date Type
(4.4) Time Zone
3.0 Function Menu
V
Function Menu can help you custom adjustments for the selected models. The menu include items such as
Reverse Switch, Travel Adjust, Sub Trim, Dual Rate and Exponential, Throttle Hold, Throttle Curve, Mix to
Throttle,Gyro Sensor, Governor,Tail Curve, Dual Pitch, Swash Mix ,Pitch Curve, Program Mix, Monito ,Fail
Safe, Sensor view, Trainer and Timer.
3.1 Reverse Switch
Press UP or DN to move navigation mark to ELE(take Elevator for
example), Press R or L to shift the status between nomal and reverse.
These are two status for option. And the default setting is Normal. All
Channels Reverse Switch like: Aileron, Throttle, Rudder, Gear, Pitch,
AUX2, AUX3, AUX4, AUX5, AUX6 and AUX7 can be referred to the way
of ELEV Reverse Switch. And press EXT to exit after finishing setting.
Press ENT to enter Main Menu; Press UP or DN to move the navigation
mark to Function Menu. And press ENT to enter Function Menu, Press
UP or DN to choose Reverse Switch and Press ENT to enter into Reverse
Switch interface.
3.2 Travel Adjust
Press ENT to enter into Main Menu. Press UP or DN to move navigation
mark to select item Function Menu. Press ENT to enter Function Menu.
Press UP or DN to select Travel Ajust, Press ENT to enter Travel Adjust
interface, as left illustration. It shows the Travel Adjust status of one
channel.
DEVO F1 2E — 30
Advertisement
Table of Contents
