Aileron To Flap Mix - devention DEVO F12E User Handbook Manual

Flap System g
Normal
Throttle Stick Inhibit
Flight Mode 0 NEM=
Flight Mode 1 Switch
Flight Mode 2 Switch
Flight Mode 3 Switch
Flight Mode 4 Switch
cleention
DEVO Fl 2E
Welcome to use the DEVO F12E transmitter
(4.2) Flight mode 0 setting
It is possible to set a certain flight mode switch automaticly after automatic Iand.When do this, you must come
to 'Wing type" setting interface under the Model Menu and make correspond Wing type setting.Refer to 2.11
Wing type.
Press UP or DN to make the navigation mark to choose "Flight mode
0"item, and press R or L to 3 options : 0:Normal;l:Midpoint and 2:Land.lt
is Mannul control when choose "Switch", but Automatic control when
choose Flight mode switch position.
(4.3) Flight mode 1 setting:refer to "(4.2)Flight mode 0 setting"
(4.4) Flight mode 2 setting: refer to "(4.2)Flight mode 0 setting"
(4.5) Flight mode 3 setting: refer to "(4.2)Flight mode 0 setting"
(4.6) Flight mode 4 setting: refer to "(4.2)Flight mode 0 setting"
Press EXT to exit after finished.
3.15 Aileron to Flap Mix
The function aims at mixing flap when operating aileron stick, and can set switch. The flap dual channels
should also be previously activated at Wing Type in Mode Menu(refer to"2.11 Wing Type")
Setting method
Press ENT to enter Main Menu ,press UP or DN to make the navigation
mark to choose "Function Menu", press ENT to enter Function Menu.
Press UP or DN to choose "Aileron to Flap Mix" and then ENT to enter
its setting interface.
(1) Pos 0 to left setting
Aileron to Flap Mix
Pos 0
Left
Right
0%
Pos 1
Left
0%
Right
0%
Throttle Stick
Inhibit
Switch Pos 0
Press UP or DN to make navigation mark to select "Pos 0 to left setting", press R or L to change the leftward
mix value of Aileron to Flap,the mix direction will be revised by changing the sign of plus or minus before the
value, the adjustable range is ±125%.
(2) Pos 0 to right setting
press UP or DN to make navigation mark to select "Pos 0 to right setting", press R or L to change the rightward
mix value of Ailren to Flap, the mix direction will be revised by changing the sign of plus or minus before the
value, the adjustable range is ±125%.
(3) Pos 1 to left setting: refer above "(1) pos 0 to left setting"
(4) Pos 1 to right setting: refer above"(2) pos 0 to right setting"
(5) Throttle stick setting
The switch between Pos 0 and Pos 1 can be realized by setting the position of throttle stick. Press UP or
DN to make navigation mark select "throttle stick setting", press R or L to change the value or inhabit. Change
value can set throttle stick postion.The default setting is "inhabit". The adjustable range is from 0.0% to 100.0%
(6) Switch setting
The switch will display the current switch position. Press UP or DN to choose Switch, press ENT to enter
interface of Switch selection, press
UP or DN to choose desired item.
Press ENT to confirm, the desired
item whose left side will be changed
into "1" from "0". If two or more items
are selected, the item And should be
selected, whose left side should be
changed into "1" from "0". Press EXT
after finished it.
Aileron to Flap Mix Switch
Pos 0
Left 0%
Right 0%
Pos 1
Left
0%
Right
0%
Throttle Stick
Inhibit
Switch
Pos 0
Flight Mode 0
oO
FMOD 1
oO
FMOD 2
Flight Mode 3
Flight Mode 4
Flap Normal
0 Flap Midpoint
DEVO Fl 2E —75