Table of Contents
Advertisement
cleention
DEVO Fl 2E
Welcome to use the DEVO F12E transmitter
(6) Brake differential setting
If co-working with the spoiler stick, the brake differential function can
counteract the differential.
Press UP or DN to move the Navigation mark to select "Brake" setting
options, press R or L to increase or decrease, respectively, the value with
a range from 0% to 100%.
Press EXT to exit after finishing the setting.
3.9 Balance
Differential
Flight Mode
Cruise Mode
Aileron
0%
Rudder
0%
Flap
0%
Tip Aileron
0%
Brake Differe...
This function can adjust the two-servo parameters, which are simultaneously used in dual output channels,
but "Dual Channels" should be previously activated at Wing Type in Model Menu (Refer to " 2.11 Wing Type").
Setting method:
Press ENT to enter Main Menu; Press UP or DN to move the navigation
mark to Function Menu, and press ENT to enter Function Menu. Press
UP or DN to choose Balance and Press ENT to enter Balance interface.
Picture as right:
(1) Channel selection
Press UP or DN to move navigation mark of Channel, Press R or L to
select the desired item.
Balance
Channel
Point < Right
Active
0%
Point - Right
Active
0%
Point - 1
Inhibit
Balance
(2) Point parameter adjustment
Point< Right Setting: Press UP or DN to choose "Point< Right". If need
to adjust the value, press L (0% means no adjusting). A minus value
means the amending direction is downward; press R to adjust value(0%
means no adjusting). A plus value means the amending direction is
upward. The adjustable range is ± 100%.
Channel
Aileron
Point < Right
Active
Point - Right
Active
0%
Point - 1
Inhibit
Point-Right Setting: Press UP or DN to choose "Point-Right". Press R or L to Inhibit or Active. If need to adjust
please Active it. There will be expanded value adjustment item. Press UP or DN to choose "0%" If need to
adjust the value, press L (0% means no adjusting). A minus value means the amending direction is downward;
press R to adjust value (0% means no adjusting). A plus value means the amending direction is upward.
The adjustable range is 100%.
Press UP or DN, there will be setting for Point-1, Point-2, Point-3, Point-Left, Point>Left, refer to the setting
method as above. Press EXT after finished it.
3.10 Gyro Sensor
This function offers the gain adjustment for gyro sensor. It is possible to be automatically switched among
various gains via flight mode, which should be previously set at Device Select in Model Menu (Refer to "2.9
Device Select"), and the gyro output should also be simultaneously set at Device Output (Refer to "2.10 Device
Output").
Gyro Sensor
2
Press ENT to enter Main Menu; Press UP or DN to move the navigation
mark to Function Menu, and press ENT to enter Function Menu. Press
UP or DN to choose Gyro Sensor and Press ENT to enter Gyro Sensor
interface. Picture as right:
(1) Mode: System default mode is Automatic.
Land Mode
Channel
AUX2
Cruise Mode
50.0%
Speed Mode
50.0%
Thermal Mode
50.0%
Launch Mode
50.0%
Land Mode
50.0%
(2) Channel: The displaying is the sensitivity channel of Gyro. Refer to "2.10 Device Output" to select.
DEVO Fl 2E —103
Advertisement
Table of Contents
