Model Name; Model Copy; Model Wireless Copy - devention DEVO F12E User Handbook Manual

Picture (1)
02 Model 02
03 Model 03
04 Model 04
05 Model 05
06 Model 06
07 Model 07
Model Copy Model Copy
g
Press UP or DN to choose the source of model copy, press ENT to
confirm then you can see the Destination selection as picture (2).
Press UP or DN to choose the destination of model copy, press ENT
to confirm then you can see the ask interface as picture (3). Press ENT
to execute the operation and return to model menu. Press EXT to exit
if not need to execute the operation.
Model Copy
Source
V
01 73. Model 0
Source: 01
Destination
4.
Model 01
Source: 01 Model 01
V 01 Model 01
Destination: 02 Model 02
02 Model 02
03 Model 03
Are you sure?
04 Model 04
05 Model 05
06 —s7 Model 06 Picture (2) Picture (3)
Model Transmit
,/ 01
4.
Model 01
Warning
No. 01 4# Model 01
Are you sure?
08 x Model 08
• si 01 40 Model 01
02 x Model 02
03 Model 03
04 Model 04
05 Model 05
06 Model 06
07 x Model 07
08 Model 08
cleention
DEVO F12E
Welcome to use the DEVO F12E transmitter
2.2 Model Name
In the menu of model name, you can make a desired name for your model for long term storage. Its data
can be directly withdrawn in next flights.Repeat the step "2.1 Model Select" to choose the model you want to
name or save, press EXT to back to the interface.
Model Name
Press "ENT" to enter Main Menu, press UP or DN to select "MODEL
Menu", then Press "ENT to enter Model Menu; Press UP or DN to select
"Model NAME" and then press "ENT" button to enter the "Model Name"
setting interface.
Press UP or DN to select the character and figure which are needed to
be changed, press R or L button to change the character and figure, and
press UP or DN to set next one. Press EXT to exit after finished.
No. 01
Name
odel 01
2.3 Model Copy
Press ENT to enter "Main Menu" and press UP or DN to make "Model Menu" is selected. Press ENT to enter
"Model Menu" and press UP or DN to select" Model Copy", press ENT to the "Model Copy" setting interface
as picture (1).
2.4 Model wireless copy
The model data between two DEVO F12E equipments can be wirelessly copied via Model Transmit and Model
Receive in Model Menu.
Model Transmit
(1)
Model transmission
Press ENT to enter "Main Menu" and press UP or DN to select "Model
Menu". Press ENT to enter "Model Menu" and press UP or DN to select
"Model transmission", continue to press ENT to enter "Model Transmit"
setting interface.
Press UP or DN to choose the source model which will be transmitted,
and press ENT to confirm, an enquiry information "Are you sure?" will be
shown as left Illustration.
DEVO F1 2E —53