Timer - devention DEVO F12E User Handbook Manual

cleention
DEVO Fl 2E
Welcome to use the DEVO F12E transmitter
3.19 Timer
There are two timers which can be set as stopwatch and countdown, respectively. Each timer can be operated
by switch or by shortcut.
Timer
Setting method:
Press ENT to enter Main Menu, and then press UP or DN to move the
navigational mark to select Function Menu. Then press ENT to enter the
Function Menu and press UP or DN to select "Timer", then press ENT
to enter Timer interface. The timing range of stopwatch is from 00:00 to
59:59 (59 minutes 59 seconds).The default setting is stopwatch.
Type Stopwatch
Switch Inhibit
(1) Countdown setting
If you need countdown time manner, press R or L to select the countdown.
There is an expand sub-menu set time item. Press UP or DN to move
the navigational mark to select the option of Seting time item. Press R
or L to set the countdown time. The settable countdown time range is
from 00:10 to 59:50.
Timer
Type Countdown
Set Time 10:00
Switch Inhibit
(2) Switch selection
Press UP or DN to move the navigational mark to Switch.There are Inhibit and available switch options,
available switch can be selected by press L or R. It includes FMOD1,2, FMOD2, MIX1,2, MIX2, ELEV D/R,AILE
D/R, RUDD D/R, GEAR SW, SPSO SW, SPS1 SW, SPS2 SW and SPS3 SW. We can select the desired
item except these items of SPSO SW, SPS1 SW, SPS2, and SPS3 which should be previously set at Stick
Position Switch at Model Menu(refer to "2.8 Stick Position Switch").
Press EXT to exit after finished.
(3) Usage of timer
Press UP or DN in main panela. It's possible to start Timers by pressing
UP key for one time, and to pause it by pressing it the second time. Press
DN to clear timer. It's ok to control time by Switch when time setting is
finished on switch. Timer will be shown in main intereface, as right
illustration:
01 Model 01 0% 00:00
Timer
0 0 0 0 0 0
DEVO F1 2E —47