Device Select - devention DEVO F12E User Handbook Manual

clXention
DEVO F 1 2 E
Welcome to use the DEVO F12E transmitter
Press UP or DN to inhibit channel in navigation mark, and press R to
expand the menu.The channel includes four items: Elevator, Aileron,
Spoiler and Rudder. The factory default is Inhibit. Take Elevator for
example.
Stick Position Switch
Off
Switch SPSO SW
Channel Elevator
Position
On Up
Stick Position Switch
Off
Switch SPSO SW
Channel
Position 0%
On Up
Press R or L to choose the Elevator as stick, then Press UP or DN to
move nagivation mark to value of position. It's possible to adjust the stick
position via pressing R or L.
Press UP or DN to navigate the On setting, press R or L to change the direction of the channel stick.
Stick Position Switch
Off Display of stick position switch status
Switch SPSO SW
Channel Elevator
Moving the stick to make sure that the direction of stick's turn-on or
Position 0%
turn-off position is correct.
On
After finished the setting, press EXT to exit.
2.9 Device select
This setting can help you configure various functional switches, or adjust levers. It includes Flight Speed
Switch, Flight Launch Switch, Aileron and Rudder Trim, Flap Trim, Flaperon Trim.
Press ENT to enter Main Menu, press UP or DN to move navigation mark
to select Model menu. Press ENT to enter Model menu. Press UP or DN
to Device select Option. Press ENT to Device select Option interface.
(1) Flight Speed Switch:
Press UP or DN to move navigation mark to Flight Speed Switch and
press R or L to select the desired switch. The factory default setting
is Inhibit.
Device Select
g
Flight Speed Switch
Flight Launch Switch
Inhibit
Launch Reverse
Normal
Aileron and Rudder Trims
Common
(2) Flight Launch Switch:
Press UP or DN to move navigation mark to Flight Launch Switch and press R or L to select the desired switch.
The factory default setting is Inhibit.
Device Select
Flight Speed Switch
Inhibit
Flight Launch Switch
FMOD SW
Launch Reverse
Normal
Aileron and Rudder Trims
Common
Launch Reverse: Press UP or DN to move navigational mark to "Launch
Reverse" setting after you select the Flight Launch Switch, press R or L
to Normal or Reverse. The factory default is Normal.
(3) Aileron and Rudder Trims
There are two options: Common and Flight Mode. In Common option, the adjustment parameter, of which
the stick is corresponding to trim, puts an equal effect on all the flight modes.
In Flight Mode, the adjustment parameter,of which the stick is corresponding to trim, puts a respective effect
on the corresponding flight mode. The factory default setting is Common.
DEVO F1 2E — 92