Throttle Hold - devention DEVO 7E User Manual

Dual Rate and 1E7.
Channel
Elevator
Position
Dual Rate and
Dua.1 Rate
l
ily:
E o
ri
e nti al
cleention
DEVO 7E
Welcome to use the DEVO 7E transmitter
Setting method:
Press ENT to enter Main Menu. Press UP or DN to move
navigation mark to desired item Function Menu. Press ENT
to enter Function Menu, press UP or DN to choose Dual
rate and Exponential, Press ENT to enter D/R and Exponential
interface.
(1) Channel selection
Press UP or DN to move navigation mark of Channel, Press R or L to set up channels containing Elevator,
Aileron and Rudder. Choose the desired channel for setting.
(2) Position selection
Press UP or DN to move navigation mark to desired item Position. In the
manual mode, the function of Dual rate and Exponential will be executed
by the corresponding FMOD switch among PosO and Pos1. Take the item
Elevator at channel as an example, It's possible to shift between PosO and
Pos 1 via pushing or pulling the FMOD switch.
D u
1::::
(3) Dual rate adjustment
Position
Pos 0
D u al Rate
Press UP or DN to move the navigation mark to desired
item Dual Rate. It's possible to change the dural rate value
of Postion via pressing R or L and the corresponding value
curve in the right top of interface will be changed accordingly.
The factory default is 100%.
100
(4) Exponential
Press UP or DN to select Exponential item of navigation mark. It's possible to change Dual Rate and Exponential
value in Pos when pressing R or L to change the value. There are ± 100% and Line three adjustment. At the
same time, the corresponding curve will be changed and shown at the right graph.
(5) Normal Mode
Press DN to move the navigation mark to "Normal Mode", press R or L to choose PosO, Pos1 and Post.
CIaaI Rate arid Ex
Expone nti ;al
7
Li rie
N o C in al o d e
PINI177m
Hymm: 1 ,:
(4) Exponential (5) Normal Mode
(6)Stunt Mode:Refer to "(5) Normal Mode"
Press EXT to exit after finishing the setting.
3.5 Throttle Hold
If the throttle hold function is activated in the function settings menu, it can be operated by the Throttle Hold
switch as shown in the picture below. The permitted setting range is from -20.0% to 50.0%. The default setting
is inhibited.
Setting method:
Press ENT to enter Main Menu, Press UP or DN to move navigation mark to select Function Menu. Press
ENT to enter Function Menu. Press UP or DN to select Throttle Hold, Press ENT to enter Throttle Hold
interface, as below illustration:
DEVO 7E — 26