Table of Contents
Advertisement
_10n
Trainee is off and trainer is working
4
JR/Ilion
Trainee is wo king and trainer is off
c. - 1 co: 1 . 1
I
I
I
Trainer.
El e wit° r
Inhibi
Aileron
Inhibit
[El
Welcome to use the DEVO 7E transmitter
clAntion
DEVO 7E
linkage icon
Turn on the power of the trainer's DEVO 7E. Select the same model as the trainee (as transferred in the
previous section) and briefly fly the aircraft to confirm the settings are good. Turn off the aircraft and turn off
the trainer's DEVO 7E power. Insert the other end of the signal wire into the trainer's DEVO 7E DSC port
and turn on the power once more.
Trainer icon
Training status display: when the trainer's icon becomes into "X", the trainee stops flying and the trainer is
working; when the trainer's icon turns into"V", the trainee is flying and the trainer is in leisure.
(3) Usage method
The default setting of the training switch is "R+" key.
During flight, if the trainer press" R+"key, the linkage icon
will be shown as "Ai" that means the control right is moved
to the trainee from trainer. If trainer pushes "R+" key once
again, the linkage icon will be show as "X" that means the
trainer takes back the control right from the trainee.
(4) Setting for training function channels
Trainee is available to get full or part of flight control power to the aircraft model via setting the training function
channel in the trainer's radio. Below is the setting method:
Press the ENT key to enter Main Menu, and then press UP or DN to get access to function menu. Then press
UP or DN to select "training function" and press ENT key to enter Trainer interface. The available channels
are shown below, and the current status of trainer switch is also shown there. Available channels include:
Elevator, Aileron, Throttle, Rudder, Gear, Pitch and Gyro.
Press EXT to exit.
Channel selection:
Press UP or DN to select the channel option; press R or L
to select the channel(s) which you want to grant to trainee.
The channels(s) you have selected will be activated as
"Active". The channel(s) which are not granted to trainee
will be kept inhibited. The default setting is "Inhibit".
DEVO 7E —9
Advertisement
Table of Contents
