Behavior If Trigger Overlap Is Set To Readout - IAI SP-20000M-PMCL User Manual

SP-20000-PMCL User Manual (Ver. 3.1)

Behavior if Trigger Overlap is Set to Readout

On this camera, if the accumulation of the next frame starts while the current image is read out, the
varied value of accumulation time is changed to 1 Line period inside the camera. This is done so that
the accumulation start signal will not affect the output signal while it is overlapped.
Modes where the exposure control becomes 1L if overlap occurs
JAI Custom Naming
Continuous Trigger
EPS Trigger / LVAL Sync Reset
As an example, the following is for Continuous Trigger.
Trigger Mode
Off
On
- 61 -
Main Functions
Trigger Overlap
-
Readout