Notes On Camera Link Cable Connections; Notes On Attaching The Lens - IAI SP-20000M-PMCL User Manual

SP-20000-PMCL User Manual (Ver. 3.1)

Notes on Camera Link Cable Connections

Secure the locking screws on the connector manually, and do
not use a driver. Do not secure the screws too tightly. Doing so
may wear down the screw threads on the camera. (Tightening
torque: 0.15 N·m or less)
Caution: Secure manually. Do not secure too tightly.

Notes on Attaching the Lens

How to Clean a Sensor
Avoiding Dust Particles
When attaching the lens to the camera, stray dust and other particles may adhere to the sensor
surface and rear surface of the lens. Be careful of the following when attaching the lens.
Work in a clean environment.
l
Do not remove the caps from the camera and lens until immediately before you attach the lens.
l
To prevent dust from adhering to surfaces, point the camera and lens downward and do not allow the lens
l
surface to come into contact with your hands or other objects.
Always use a blower brush to remove any dust that adheres.
l
Never use your hands or cloth, blow with your mouth, or use other methods to remove dust.
l
- 11 -
Usage Precautions