Device Control; Image Format Control - IAI SP-20000M-PMCL User Manual

SP-20000-PMCL User Manual (Ver. 3.1)

Device Control

Name
DeviceFirmware Version
DeviceReset

Image Format Control

Name
Width
Related Topic: ROI
(Regional Scanning
Function)
Height
OffsetX
OffsetY
BinningHorizontal
Interface
Short ASCII
Access
R/O VN
W/O CRS00
Short
Access Values
ASCII
R/W WTC 8 ~ (5120 - OffsetX)
R/W HTL 1 ~ (3840 - OffsetY)
R/W OFC 0 ~ (5112 - Width)
R/W OFL 0 ~ (3838 - Height)
1: Normal
R/W HB
2: Binning mode
Values Default
Firm Ver. No. -
1 -
DEFAULT
WTC=[Param.]<CR><LF>
WTC?<CR><LF>
5120
Set the image width. (The value will be set in
configuration steps)
HTL=[Param.]<CR><LF>
HTL?<CR><LF>
(2 line/ Step)
3840
Set the image height. (The value will be set in
configuration steps)
OFC=[Param.]<CR><LF>
OFC?<CR><LF>
0
Set the horizontal offset. (The value will be set in
configuration steps)
OFL=[Param.]<CR><LF>
OFL?<CR><LF>
0
Set the vertical offset. (The value will be set in
configuration steps)
HB=[Param.]<CR><LF>
HB?<CR><LF>
1
Set the number of pixels in the horizontal
direction for which to perform binning. (Mono
model only)
- 117 -
Short ASCII Command List
Description
VN?<CR><LF>
Display the firmware version.
CRS00=1<CR><LF>
Reset the device.
Description