IAI SP-20000M-PMCL User Manual page 25

SP-20000-PMCL User Manual (Ver. 3.1)
Example: Change the Width setting (ImageFormatControl)
1. To check the current Width setting, enter the command WTC?<CR><LF> from the terminal emulator
software.
2. To change the Width setting to 1200, enter WTC=1200<CR><LF>.
3. To change other setting items, please use the Short ASCII command below.
Item
Width
Height
OffsetX
OffsetY
PixelFormat
Example: Change the PixelFormat setting (ImageFormatControl)
1. To check the current PixelFormat setting, enter the command BA?<CR><LF> from the terminal emulator
software.
2. To change the PixelFormat setting to Mono10, enter BA=1<CR><LF>.
Short ASCII
Command
WTC 8 ~ 5120 (8 pixels/step)
HTL 2 ~ 3840 (2 line/step)
OFC 0 ~ 5112 (8 pixels/step)
OFL 0 ~ 3838, 2 line / step
0: Mono8 (Default), 1: Mono10, 2: Mono12*
0: BayerRG8 (Default), 1: BayerRG10, 2: BayerRG12
BA
Note: *Mono12: Geometry_1x4_1Y only.
- 25 -
Value
Preparation