SP-20000-PMCL User Manual (Ver. 3.1)
⑥ AC adapter (Power Supply, If Necessary)
Connect the AC adapter and the round connector of the connection cable to the DC IN / trigger IN
connector on the camera.
Note: The AC adapter is not required when using PoCL.
Step 2: Verify Camera Operation
When power is supplied to the camera while the necessary equipment is connected, the
POWER/TRIG LED at the rear of the camera lights amber, and initialization of the camera starts.
When initialization is complete, the POWER/TRIG LED lights green.
Verify whether power is being supplied to the camera by checking the rear LED. When properly turned
on, the power LED is lit green.
Note: For details on how to read the LEDs, see the
③ POWER/TRIG LED
- 22 -
Preparation
section.