IAI SP-20000M-PMCL User Manual page 79

SP-20000-PMCL User Manual (Ver. 3.1)
Description
(f) Frame Active
FVAL Falling Edge to Frame
(h)
Active Falling Edge
Frame Trigger wait Falling
(i) Edge to Frame Active Raising
Edge
Frame Active Raising Edge to
(j)
Exposure Active Raising Edge
Frame Start Trigger to
(k)
Exposure Active Raising Edge
Exposure Active Start Edge: CL
-
/ TTL Out phase difference
Exposure Active End Edge:
-
CL / TTL Out phase difference
GPIO Out Timing (Reference) (60 MHz, EPS Trigger, Trigger Overlap= OFF)
Description
Frame Start Trigger to Frame
(a)
Trigger Wait Falling Edge
Exposure Active Falling Edge
(b)
to FVAL Raising Edge
Frame Active Falling Edge to
(c) Frame Trigger Wait Raising
Edge
(d) Exposure Active
(e) FVAL Active
Tap Geometry Setting
1X8-1Y 1X4-1Y 1X2-1Y
31.75 63.18 126.36
ms ms ms
1.110 us 1.110 us 410 ns
1.19 us 1.19 us 1.19 us
0 ns 0 ns 0 ns
2.05 us 2.05 us 2.23 us
(470 ns) (470 ns) (660 ns)
1.60 us 1.60 us 1.60 us If the polarity is Active High
240 ns 240 ns 240 ns
Tap Geometry Setting
1X8-1Y 1X4-1Y 1X2-1Y
890 ns 890 ns 810 ns
429 us 440us 881 us
(430 us) (441 us) (881 us)
975 ns 975 ns 1.028us
9.04 us 9.04 us 9.09 us
(10.37 (10.37 (10.43
us) us) us)
42.20 84.39 168.78
ms ms ms
- 79 -
[Exposure Mode] = Timed
This will be different by Binning or ROI setting. Frame Active
End Edge against FVAL Active End is shifted by approx. 1us.
Exposure Active at TTL I/F ( ) is if comparing with Exposure
Active which is assigned to Camera Link Spare Bit
If the polarity is Active High
Frame Start Trigger is input through TTL IN 1
Varies by Tap Geometry setting. ( ) is Exposure Active which
is assigned to Camera Link Spare Bit
Exposure Time = 10. ( ) is Exposure Active which is assigned
to Camera Link Spare Bit.
If Binning off and [Height]=3840, (Will be changed by Height
setting)
Main Functions
Note
Note