Camera Output Format (Tap Geometry) - IAI SP-20000M-PMCL User Manual

SP-20000-PMCL User Manual (Ver. 3.1)

Camera Output Format (Tap Geometry)

Related Setting Items:
This camera supports the following output format.
Camera Output Format
1X2 – 1Y
1X4 – 1Y
1X8 – 1Y
Note: The camera output description is based on GenICam SFNC Ver.1.5.1.
1X2–1Y
1X2–1Y is a 2-tap readout system specified in GenICam Tap Geometry and it outputs as follows.
Width: 5120 pixels, 2560 pixels x 2 Taps
Height: 3840 pixels
Transport Layer Control
8 bit, 10 bit, 12 bit
8 bit, 10 bit, 12 bit
8 bit, 10 bit
- 40 -
Main Functions
Pixel Format