④ Frame Grabber Board; ⑤ Aux Cable (10 Pin) (Option); ⑥ Dc In / Trigger In Connection Cable; ⑦ Ac Adapter (Power Supply) - IAI SW-4000T-MCL User Manual

3 cmos prism line scan camera with mini camera link interface

Table of Contents

SW-4000T-MCL User Manual (2.0)

Note: The maximum Camera Link cable length is 10 m. The maximum length of cable you

can use will also vary depending on type and maker. If the CableEmphasis setting of

TransportLayerControl

lengthen the Camera Link cable.

④ Frame Grabber Board

Refer to the operating instructions of the frame grabber board and configure settings on the

computer as necessary. (Use a computer that meets the requirements of your frame grabber

board).

⑤ AUX Cable (10 Pin) (Option)

Performs external I/O such as trigger input.

⑥ DC IN / Trigger IN Connection Cable

Performs external I/O such as power supply and trigger input.

⑦ AC Adapter (Power Supply)

Connect the AC adapter and the round connector of the connection cable to the DC IN / Trigger IN

connector on the camera.

is changed from Normal to Medium or Strong, it may be possible to

- 21 -

Preparation

Table of Contents