Sequence Roi Setting Parameters - IAI SP-20000M-PMCL User Manual

SP-20000-PMCL User Manual (Ver. 3.1)
one.
The sequence must start with Index 0. After Index 0 is executed, the sequence proceeds to the next
l
setting index.
In this mode, while the previous trigger operation (Index table) is activating, the next trigger cannot be
overlapped. Sequence index table must be through index 0 and after index 0 is performed, the next
index can be operated.

Sequence ROI Setting Parameters

Setting parameters for Sequence ROI are as follows. (The Default shows the default value for Index 1
~ 10, except Sequence ROI Next Index)
Item Default
Sequence In Sequence ROI Index Selector, Index 1 to 10 can be selected. Sequence ROI – Width, Height, Offset X,
ROI Index - Offset Y, Gain Selector - Gain/Red/Blue, Exposure Time, Black Level, Binning Horizontal, Binning Vertical,
Selector LUT Enable, Frame Count, Next Index for the selected index are displayed.
Sequence This can set how many times the selected index is repeated. This is applied to each index. Triggers are input
ROI Frame 1 according to numbers set in Frame Count and index is repeated and moves to the next index. Therefore, the
Count same number of triggers as Frame Count must be input.
Sequence
The number of the index that will follow the current index can be set. If [Video Send Mode] is set to "Trigger
ROI Next Index 0
Sequence" and the trigger pulse is input in EPS trigger, the sequence is executed from index 0.
Index
Sequence Set the width of sequence ROI. The setting range is 8 to 5120 Pixels. Rules for setting area and step number
5120
ROI Width are the same as the normal ROI mode set by [Video Send Mode] ="Normal".
Sequence Set the height of sequence ROI. The setting range is 2 to 3840 lines. Rules for setting area and step number
3840
ROI Height are the same as the normal ROI mode set by [Video Send Mode] ="Normal".
Set Offset X of sequence ROI.
Sequence
0
ROI Offset X
The limitations of step number and other factors are the same as the normal ROI mode set by [Video Send
Mode] ="Normal".
Set Offset Y of sequence ROI.
Sequence
0
ROI Offset Y
The limitations of step number and other factors are the same as the normal ROI mode set by [Video Send
Mode] ="Normal".
Sequence ROI Binning Horizontal =1 (Off): Setting range is 0 to (5120 - [Sequence ROI Width])
l
Sequence ROI Binning Horizontal =2 (On): Setting range is 0 to (2560 - [Sequence ROI Width])
l
Sequence ROI Binning Vertical =1 (Off): Setting range is 0 to (3840 - [Sequence ROI Height])
l
Sequence ROI Binning Vertical =2 (On): Setting range is 0 to (1920 - [Sequence ROI Height])
l
Description
- 99 -
Main Functions