Table of Contents
Advertisement
Quick Links
User Manual
Preliminary Version
Thank you for purchasing this product.
Be sure to read this documentation before use.
This documentation includes important safety precautions and instructions on how to operate the unit. Be sure to read this documentation to ensure
proper operation.
The contents of this documentation are subject to change without notice for the purpose of improvement.
© 2022 JAI
GOX-5105M-PGE
GOX-8105M-PGE
GOX-12405M-PGE
GOX-16205M-PGE
GOX-20405M-PGE
GOX-24505M-PGE
Monochrome and Color Camera with GigE Interface
Go-X_Series_PGE_Manual_Ver.Preliminary_2022-06-27
GOX-5105C-PGE
GOX-8105C-PGE
GOX-12405C-PGE
GOX-16205C-PGE
GOX-20405C-PGE
GOX-24505C-PGE
CMOS Digital Progressive Scan
Document Version: Preliminary
Advertisement
Table of Contents
Related Manuals for IAI GOX-5105M-PGE
Summary of Contents for IAI GOX-5105M-PGE
- Page 1 User Manual Preliminary Version GOX-5105M-PGE GOX-5105C-PGE GOX-8105M-PGE GOX-8105C-PGE GOX-12405M-PGE GOX-12405C-PGE GOX-16205M-PGE GOX-16205C-PGE GOX-20405M-PGE GOX-20405C-PGE GOX-24505M-PGE GOX-24505C-PGE CMOS Digital Progressive Scan Monochrome and Color Camera with GigE Interface Document Version: Preliminary Go-X_Series_PGE_Manual_Ver.Preliminary_2022-06-27 Thank you for purchasing this product. Be sure to read this documentation before use.
-
Page 2: Table Of Contents
User Manual (Ver. Preliminary) - Table of Contents GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE Table of Contents Table of Contents About Technical Note Notice/Warranty Notice Warranty Certifications CE Compliance Warning Supplement Supplement Usage Precautions Notes on Cable Configurations Notes on Attaching The Lens Notes on LAN Cable Connection Phenomena Specific to CMOS Image Sensors... - Page 3 User Manual (Ver. Preliminary) - Table of Contents GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE Recommended External Output Circuit Diagram Characteristics of the Recommended Circuits for Opto OUT Preparation Step 1: Install the Software (First Time Only) Step 2: Connect Devices ①...
- Page 4 User Manual (Ver. Preliminary) - Table of Contents GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE SensorDigitizationBits Image Flip Function GPIO (Digital Input/Output Settings) VideoProcessBypassMode Gain Control Automatic Gain Level Control White Balance Color Temperature ALC (Automatic Level Control) Function To Use the ALC Function Gamma Function To Use the Gamma Function...
- Page 5 User Manual (Ver. Preliminary) - Table of Contents GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE Configuration Example Edge Enhancer Sequencer Function TriggerSequencer Mode Sample TriggerSequencer Mode Operation CommandSequencer Mode Pulse Generator Counter and Timer Control Function Counter Occurrence Diagram Internal Camera Blocks To Use the Counter Function...
- Page 6 Miscellaneous Troubleshooting Power Supply and Connections Image Display Settings and Operations Specifications Package Contents Spectral Response (GOX-5105M-PGE/GOX-5105C-PGE) Spectral Response (GOX-8105M-PGE/GOX-8105C-PGE) Spectral Response (GOX-12405M-PGE/GOX-12405C-PGE) Spectral Response (GOX-16205M-PGE/GOX-16205C-PGE) Spectral Response (GOX-20405M-PGE/GOX-20405C-PGE) Spectral Response (GOX-24505M-PGE/GOX-24505C-PGE) Dimensions Comparison of the Decibel Display and Multiplier Display...
-
Page 7: About Technical Note
User Manual (Ver. Preliminary) - Table of Contents GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE About Technical Note Some additional technical information is provided on the JAI website as Technical Notes. In this manual, if a technical note is available for a particular topic, the above icon is shown. Please refer to the following URL for Technical notes. -
Page 8: Notice/Warranty
Certifications CE Compliance As defined by the Directive 2004/108/EC of the European Parliament and of the Council, EMC (Electromagnetic compatibility), JAI Ltd., Japan declares that GOX-5105M-PGE, GOX-5105C-PGE, GOX-8105M-PGE, GOX-8105C-PGE, GOX-12405M-PGE, GOX-12405C-PGE, GOX-16205M-PGE, GOX-16205C-PGE, GOX-20405M-PGE, GOX-20405C-PGE, GOX-24505M-PGE, and GOX-24505C- PGE comply with the following provisions applying to their standards. -
Page 9: Warning
User Manual (Ver. Preliminary) - Notice/Warranty GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Warning Changes or modifications to this unit not expressly approved by the party responsible for FCC compliance could void the user’s authority to operate the equipment. -
Page 10: Supplement
Pollution by Electronic Information Products “, known as “China RoHS“. The table shows contained Hazardous Substances in this camera. mark shows that the environment-friendly use period of contained Hazardous Substances is 15 years. Applicable models: GOX-5105M-PGE, GOX-8105M-PGE, GOX-12405M-PGE, GOX-16205M- PGE, GOX-20405M-PGE, GOX-24505M-PGE 重 要 注 意 事 项 有毒，有害物质或元素名称及含量表... -
Page 11: Supplement
User Manual (Ver. Preliminary) - Notice/Warranty GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE Supplement The following statement is related to the regulation on “Measures for the Administration of the Control of Pollution by Electronic Information Products “, known as “China RoHS“. The table shows contained Hazardous Substances in this camera. -
Page 12: Usage Precautions
User Manual (Ver. Preliminary) - Usage Precautions GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE Usage Precautions Notes on Cable Configurations The presence of lighting equipment and television receivers nearby may result in video noise. In such cases, change the cable configurations or placement. -
Page 13: Phenomena Specific To Cmos Image Sensors
User Manual (Ver. Preliminary) - Usage Precautions GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE Phenomena Specific to CMOS Image Sensors The following phenomena are known to occur on cameras equipped with CMOS image sensors. These do not indicate malfunctions. Aliasing: When shooting straight lines, stripes, and similar patterns, vertical aliasing (zigzag distortion) may appear on the monitor. -
Page 14: Features
In addition, these provide an attractive combination of high resolution, high speed, and high image quality for machine vision applications. Model Name Image Sensor Active Pixels Pixel Size Max Frame Rate* GOX-5105M-PGE Mono Type 1/1.8 2472 x 2064 2.74 μm x 2.74 μm 23 fps GOX-5105C-PGE... -
Page 15: Parts Identification
User Manual (Ver. Preliminary) - Parts Identification GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE Parts Identification ① Lens Mount (C-Mount) ② RJ-45 Connector ③ LINK LED ④ ACT LED ⑤ POWER/TRIG LED ⑥ DC IN/TRIG Connector (6-Pin Round) ⑦... -
Page 16: ② Rj-45 Connector
User Manual (Ver. Preliminary) - Parts Identification GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE ② RJ-45 Connector Connect a Gigabit Ethernet compatible LAN cable (Category 5e or higher, Category 6 recommended) here. GigE Vision Interface Signal TRD+ (0) TRD- (0) TRD+ (1) -
Page 17: ⑤ Power/Trig Led
User Manual (Ver. Preliminary) - Parts Identification GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE ⑤ POWER/TRIG LED Indicates the power or trigger input status. Status Lit amber Camera initializing Lit green Camera in operation During operation in trigger mode, trigger signals are being input. Blinking Note: The blinking interval is not related to the actual input interval of the external green... -
Page 18: ⑦ ⑧ Camera Locking Screw Holes
User Manual (Ver. Preliminary) - Parts Identification GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE ⑦ ⑧ Camera Locking Screw Holes Use these holes when mounting the camera directly to a wall or other structural system. ⑦ Upper part of camera: M3, 3mm depth, 20mm pitch ⑧... -
Page 19: Characteristics Of The Recommended Circuits For Opto Out
User Manual (Ver. Preliminary) - Parts Identification GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE Characteristics of the Recommended Circuits for Opto OUT OUTPUT LINE RESPONSE TIME For the operating conditions of applied voltage (User Power) +12V, load resistance 10kΩ, and cable length 1m, the timing is shown in the table below. -
Page 20: Preparation
User Manual (Ver. Preliminary) - Preparation GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE Preparation Read this section to learn how the camera connects to devices and accessories. The preparation process is described below. Step 1: Install the Software (First Time Only) Install the software for configuring and controlling the camera (eBUS SDK for JAI) on the computer. -
Page 21: Step 1: Install The Software (First Time Only)
User Manual (Ver. Preliminary) - Preparation GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE Step 1: Install the Software (First Time Only) When using the camera for the first time, install the software for configuring and controlling the camera (eBUS SDK for JAI) on the computer. -
Page 22: ① Lens
C-mount lenses with lens mount protrusions of 9 mm or less can be attached. To prevent vignetting and to obtain the optimal resolution, use a lens that will cover the image sensor size. Model Name Image Sensor GOX-5105M-PGE Mono Type 1/1.8 6.8 mm x 5.7 mm (8.82mm diagonal) GOX-5105C-PGE... -
Page 23: ② Direct Mounting (Or Use Mp-46 Tripod Adapter Plate)
User Manual (Ver. Preliminary) - Preparation GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE Cautions: The maximum performance of the camera may not be realized depending on the lens. Attaching a lens with a mount protrusion of 9 mm or longer may damage the lens or camera. ②... -
Page 24: ⑥ Ac Adapter (Power Supply) (If Necessary)
User Manual (Ver. Preliminary) - Preparation GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE ⑥ AC Adapter (Power Supply) (If Necessary) Connect the AC adapter and the round connector of the connection cable to the DC IN / Trigger IN connector on the camera. - Page 25 User Manual (Ver. Preliminary) - Preparation GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE 2. Select the camera you want to configure. Click the Select / Connect button. 3. The connected camera is listed. Please select one camera and click OK. - 25 -...
- Page 26 User Manual (Ver. Preliminary) - Preparation GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE 4. Check that the settings of the selected camera are displayed. 5. Click the Device control button. The screen shown below will be displayed. In this window, you can adjust various settings of the camera.
-
Page 27: Step 5: Change The Camera Settings
User Manual (Ver. Preliminary) - Preparation GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE Step 5: Change the Camera Settings This section explains how to change settings by describing the procedure for changing the output format as an example. Configure the Output Format Configure the size, position, and pixel format of the images to be acquired. -
Page 28: Step 6: Adjust The Image Quality
User Manual (Ver. Preliminary) - Preparation GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE Step 6: Adjust the Image Quality Related Setting Items: AnalogControl Display the camera image and adjust the image quality. Display the Image Display the image captured by the camera. When you click the Play button, the camera image appears in the right area. -
Page 29: Adjust The Gain
User Manual (Ver. Preliminary) - Preparation GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE Adjust the Gain Adjust the image quality using the gain and white balance functions. The Visibility must be changed from Beginner to Guru. Note: For details on the Gain control, see Gain Control in the Main Functions chapter. -
Page 30: Adjust The White Balance
User Manual (Ver. Preliminary) - Preparation GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE Adjust the White Balance Adjust the white balance using the automatic adjustment function. Note: The white balance is only supported on color models. Automatic White Balance Adjustment 1. -
Page 31: Adjust The Black Level
User Manual (Ver. Preliminary) - Preparation GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE Adjust the Black Level 1. Expand AnalogControl, and select the black level you want to configure in BlackLevelSelector. All (master black), Red* (digital R), and Blue* (digital B) can be configured. Note: *Color models only. -
Page 32: Step 7: Save The Settings
User Manual (Ver. Preliminary) - Preparation GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE Step 7: Save the Settings Related Setting Items: UserSetControl The setting values configured in eBUS SDK for JAI will be deleted when the camera is turned off. By saving current setting values to user memory, you can load and recall them whenever necessary. -
Page 33: To Save User Settings
User Manual (Ver. Preliminary) - Preparation GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE To Save User Settings 1. Stop image acquisition. 2. Expand UserSetControl, and select the save destination (UserSet1 to UserSet3) in UserSetSelector. Note: The factory default setting values are stored in Default and cannot be overwritten. Caution: Settings can only be saved when image acquisition on the camera is stopped. -
Page 34: To Load User Settings
User Manual (Ver. Preliminary) - Preparation GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE To Load User Settings 1. Stop image acquisition. User settings can only be loaded when image capture on the camera is stopped. 2. Select the settings to load (UserSet1 to UserSet3) in UserSetSelector. 3. -
Page 35: Main Functions
User Manual (Ver. Preliminary) - Main Functions GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE Main Functions This chapter describes the camera's main functions. Acquisition Control Related Setting Items: AcquisitionControl This camera has three Acquisition modes (SingleFrame, MultFrame, Continuous). Use the AcquisitionControl settings to perform operations and settings for image capture. -
Page 36: Changing The Frame Rate
User Manual (Ver. Preliminary) - Main Functions GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE Note: After changing various settings, the black level may not be stable for several frames immediately after AcquisitionStart. Changing the Frame Rate When TriggerMode is disabled, you can change the frame rate in AcquisitionFrameRate. -
Page 37: Actual Exposure Time
User Manual (Ver. Preliminary) - Main Functions GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE ExposureMode = TriggerWidth Mode in which control of the exposure time is performed using the pulse width of the trigger input signal. The exposure time will be the same as the pulse width of the trigger input signal. Notes: The settings for exposure control and triggers are related to each other. -
Page 38: Burst Trigger Mode
User Manual (Ver. Preliminary) - Main Functions GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE Burst Trigger Mode Related Setting Items: AcquisitionControl In Burst Trigger mode, when a single external trigger signal is received, the camera acquires images continuously at high speed, stores the images in the internal memory temporarily, and then the image data is read out. -
Page 39: Burst Trigger Mode Usage Examples
User Manual (Ver. Preliminary) - Main Functions GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE The number of frames that can be acquired depends on the model and SensorDigitizationBits setting. For example, if you are using GOX-5105C-PGE and SensorDigitizationBits is set to 10Bits, the maximum number of frames that can be acquired is 32. - Page 40 User Manual (Ver. Preliminary) - Main Functions GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE Example 3: In Addition to Example 2, Use TriggerSequencer Mode In this example, the number of frames to be acquired is defined by the number of FrameStart triggers, and the frame rate is defined by the input trigger signal's interval.
-
Page 41: Trigger Control
User Manual (Ver. Preliminary) - Main Functions GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE Trigger Control Related Setting Items: AcquisitionControl The camera allows the following controls to be performed via external trigger signals. TriggerSelector Description AcquisitionStart Start image acquisition in response to the external trigger signal input. -
Page 42: When Using The Framestart Trigger
User Manual (Ver. Preliminary) - Main Functions GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE You can specify a delay after receiving the trigger signal until the trigger is enabled. TriggerDelay Note: This trigger type is available only when TriggerSelector is set to FrameStart. When Using the FrameStart Trigger When AcquisitionStart is executed and a FrameStart trigger is received before the AcquisitionStop command is executed, one frame is acquired. -
Page 43: Pixel Format
User Manual (Ver. Preliminary) - Main Functions GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE Pixel Format Related Setting Items: ImageFormatControl Selectable PixelFormat is as follows. BayerRG8 (default), BayerRG10, BayerRG10Packed, BayerRG12, BayerRG12Packed, BayerGR8*, BayerGR10*, BayerGR10Packed*, BayerGR12*, BayerGR12Packed*, BayerGB8*, BayerGB10*, BayerGB10Packed*, BayerGB12*, BayerGB12Packed*, Color models BayerBG8*, BayerBG10*, BayerBG10Packed*, BayerBG12*, BayerBG12Packed*... -
Page 44: Image Flip Function
User Manual (Ver. Preliminary) - Main Functions GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE Image Flip Function Related Setting Items: ImageFormatControl Using this function, you can output the image by inverting it horizontally and/or vertically. In the ImageFormatControl settings, To reverse the image horizontally, set ReverseX to True. -
Page 45: Gpio (Digital Input/Output Settings)
User Manual (Ver. Preliminary) - Main Functions GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE GPIO (Digital Input/Output Settings) Related Setting Items: DigitalIOControl The camera can input/output the following signals to and from external input/output connectors. External Output Line2 : Opt Out DC IN / TRIG IN Connector (6-pin round) Internal Output... -
Page 46: Videoprocessbypassmode
User Manual (Ver. Preliminary) - Main Functions GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE The table below shows the source signals that can be set. VideoProcessBypassMode Related Setting Items: ImagingControl The video process bypass mode is a function that bypasses internal video processing on the camera. To use this function, VideoProcessBypassMode must be set to On. -
Page 47: Gain Control
User Manual (Ver. Preliminary) - Main Functions GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE Gain Control Related Setting Items: AnalogControl Adjust the overall gain with AnalogAll (master gain), and adjust the white balance by changing DigitalRed and DigitalBlue. Color Model Monochrome Model Automatic Gain Level Control... -
Page 48: White Balance
User Manual (Ver. Preliminary) - Main Functions GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE White Balance Related Setting Items: AnalogControl To adjust the white balance automatically, set BalanceWhiteAuto to Once (automatic adjustment only once) or Continuous (automatic adjustment always). The metering area can be limited for automatic adjustment. -
Page 49: Alc (Automatic Level Control) Function
User Manual (Ver. Preliminary) - Main Functions GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE ALC (Automatic Level Control) Function Related Setting Items: AutoLevelControl The ALC (automatic level control) function combines the automatic gain control (AGC/Auto Gain Control) and automatic exposure control (ASC/Auto Shutter Control) functions and is capable of handling various changes in brightness. -
Page 50: Gamma Function
User Manual (Ver. Preliminary) - Main Functions GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE Gamma Function Related Setting Items: AnalogControl The Gamma function corrects the output signals from the camera beforehand (reverse correction), taking into consideration the light-emitting properties of the monitor display. As the light-emitting properties of the monitor are not linear, the entire image may be darker or the gradation in the dark areas may be less noticeable when camera outputs are displayed without processing. -
Page 51: Lut (Lookup Table)
User Manual (Ver. Preliminary) - Main Functions GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE LUT (Lookup Table) Related Setting Items: LUTControl The LUT function is used to generate a non-linear mapping between signal values captured on the sensor and those that are output from the camera. -
Page 52: Blemishcompensation
User Manual (Ver. Preliminary) - Main Functions GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE BlemishCompensation Related Setting Items: BlemishControl Multiple defective pixels that are not adjacent to each other can occur on CMOS sensor cameras. This camera features a function that interpolates defective pixels using the surrounding pixels. Up to 2000 pixels can be corrected. -
Page 53: Manual Configuration
User Manual (Ver. Preliminary) - Main Functions GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE Manual Configuration 1. Select the index in BlemishCompensationIndex. You can select from 1 to 2000. However, configure the indexes in order starting with the smallest index. If you skip indexes while configuring settings, interpolation may not be performed. -
Page 54: Shading Correction
User Manual (Ver. Preliminary) - Main Functions GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE Shading Correction Related Setting Items: ShadingControl The ShadingCorrection function corrects non-uniformity (i.e., shading) in the amount of light generated by the lens and lighting equipment. Using this function allows correction even if top, bottom, left, and right shading is not symmetrical in relation to the center of the screen (H, V). -
Page 55: To Use The Shading Correction Function
User Manual (Ver. Preliminary) - Main Functions GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE Cautions: For FlatShading and ColorShading, the maximum amount of correction gain for all pixels is limited to 8 times the amount of gain before correction. (The amount of gain cannot be increased to more than 8 times the amount of gain from before correction.) If the area in the screen with the highest brightness level is 1000 LSB or higher (during 10-bit video output), or if the lowest brightness level is less than 45 LSB (during 10-bit video... -
Page 56: Binning Function
User Manual (Ver. Preliminary) - Main Functions GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE Binning Function Related Setting Items: ImageFormatControl The Binning function allows you to combine the signal values of clusters of adjacent pixels to create improved virtual pixels. -
Page 57: Image Scaling Mode (Xscale)
User Manual (Ver. Preliminary) - Main Functions GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE Image Scaling Mode (Xscale) Related Setting Items: ImageFormatControl JAI's Xscale algorithm digitally reduces the sensor image by specifying the vertical and horizontal scaling ratio. -
Page 58: Specifying The Scaling Ratio
User Manual (Ver. Preliminary) - Main Functions GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE 4. Use ImageScalingHorizontal and ImageScalingVertical to specify the horizontal and vertical scaling ratio. For more information on how to specify the scaling ratio, see Specifying the Scaling Ratio. -
Page 59: Decimation Mode
User Manual (Ver. Preliminary) - Main Functions GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE 1. First, find the scaling ratio for the ROI. To make the virtual pixel size of the new camera (GOX- 5105C) the same size as the current camera (GOX-2402C), the scaling ratio is "0.79" (2.74 ÷ 3.45 = 0.79). -
Page 60: Gradation Compression Mode
User Manual (Ver. Preliminary) - Main Functions GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE Gradation Compression Mode Related Setting Items: ImageFormatControl This function compresses the bit depth of captured images to enable images containing a wide range of pixel values to be output as a narrower set of intensity gradations. -
Page 61: Examples
User Manual (Ver. Preliminary) - Main Functions GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE 3. Select a value for GradationCompression1stGain in order to set the slope angle at the first knee point. Available values range from 0 dB (no compression) to -66 dB. 4. - Page 62 User Manual (Ver. Preliminary) - Main Functions GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE SensorDigitizationBits = 12Bits Cautions: When VideoProcessBypassMode is set to Off, JAI cannot guarantee the configured knee point value because the GradationCompression1st(2nd)KneePoint value will not match the output signal's knee point level due to the effect of the digital gain value, which is performed during post-processing.
-
Page 63: Image Compression Mode (Xpress)
User Manual (Ver. Preliminary) - Main Functions GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE Image Compression Mode (Xpress) Related Setting Items: ImageFormatControl Xpress provides a lossless compression algorithm that reduces the size of image data while enabling it to be fully reconstructed later. - Page 64 User Manual (Ver. Preliminary) - Main Functions GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE eBUS Player for Xpress: If you want to display the compressed stream, you can use this viewer (not needed for runtime applications). 2.
-
Page 65: How To Use Decompression Library
User Manual (Ver. Preliminary) - Main Functions GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE How to Use Decompression Library Below is a brief description of how to use the Decompression Library. CompressedBufferBpp8 This class performs the decompression of 8-bit compressed images on a frame-by-frame basis. (Classes for 10-bit and 12-bit images are not implemented.) Create an Instance /// <summary>... - Page 66 User Manual (Ver. Preliminary) - Main Functions GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE Decompression is performed by specifying a preallocated buffer to expand the decompressed image and then executing DoDecompress. Decompression is executed in a separate thread for each line of the image.
-
Page 67: Overlay Mode
User Manual (Ver. Preliminary) - Main Functions GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE Overlay Mode Related Setting Items: ImageFormatControl Note: This function cannot be used with the Sequencer Function. OverlayMode = MultiRoiAreaMode In this mode, you can check the readout area when using the ROI Function (Multi ROI). -
Page 68: Roi Function (Single Roi)
User Manual (Ver. Preliminary) - Main Functions GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE ROI Function (Single ROI) Related Setting Items: ImageFormatControl The ROI (region of interest) function allows you to output images by specifying the areas to scan. Specify the area to scan by specifying width, height, and horizontal/vertical offset values under ImageFormatControl. -
Page 69: Single Roi - Example
User Manual (Ver. Preliminary) - Main Functions GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE Height/OffsetY (Lines) Height Binning Mode Binning OFF Binning ON *C, D = HeightMax OffsetY Vertical Binning 8 to [(*C) - OffsetY], 4 to [ (*D) - OffsetY], GOX-5105MC-PGE 2064 1032 Height (lines) -
Page 70: Roi Function (Multi Roi)
User Manual (Ver. Preliminary) - Main Functions GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE ROI Function (Multi ROI) Related Setting Items: MultiROIControl Notes: Refer to Functions That Cannot Be Used Together for usage restrictions. If this function is turned on while Shading Correction is set to On, Shading Correction will be forced to Off. - Page 71 User Manual (Ver. Preliminary) - Main Functions GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE Caution: The specified areas cannot overlap. If the areas overlap, all indexes after the overlapping areas become unconfigurable. Notes: The frame rate can be increased in relation to the size of the area specified in the vertical direction, but not in relation to the horizontal direction.
-
Page 72: Configuration Example
User Manual (Ver. Preliminary) - Main Functions GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE Configuration Example To use four areas as shown below, refer to the following. 1. Set MultiROIControl->MultiRoiMode On. 2. Select “0” in MultiRoiIndex. Set MultiRoiWidth, MultiRoiHeight, MultiRoiOffsetX and MultiRoiOffsetY. -
Page 73: Edge Enhancer
User Manual (Ver. Preliminary) - Main Functions GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE Edge Enhancer Related Setting Items: ImagingControl This camera is equipped with an Edge Enhancer function for enhancing the contrast of lines or edges within images. -
Page 74: Sequencer Function
User Manual (Ver. Preliminary) - Main Functions GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE Sequencer Function Related Setting Items: SequencerControl The Sequencer function lets you define up to 32 index combinations of exposure time, gain, ROI, and other settings which can be stepped through each time a trigger is received. -
Page 75: Sample Triggersequencer Mode Operation
User Manual (Ver. Preliminary) - Main Functions GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE SequencerFrameCount: This configures the number of frame acquisitions for the selected SequencerIndex. SequencerReset: During TriggerSequencer mode operation, this switches the index number to be executed to that specified in SequencerSetStart. -
Page 76: Commandsequencer Mode
User Manual (Ver. Preliminary) - Main Functions GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE CommandSequencer Mode As with TriggerSequencer mode, you can define up to 32 indexes beforehand in this mode. Set SequencerCommandIndex to point to one of your preconfigured indexes. This index will be executed on each trigger, until it is changed to point to a different index, typically by your vision application. -
Page 77: Pulse Generator
User Manual (Ver. Preliminary) - Main Functions GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE Pulse Generator Related Setting Items: PulseGenerator Tips for using the Pulse Generator By using this function, any signal can be generated inside the camera. The following is an example of signal generation. -
Page 78: Counter And Timer Control Function
User Manual (Ver. Preliminary) - Main Functions GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE Counter and Timer Control Function Related Setting Items: CounterAndTimerControl Note: This camera supports only the counter function. The counter function counts up change points in the camera’s internal signals using the camera’s internal counter and reads that information from the host side. -
Page 79: Internal Camera Blocks
User Manual (Ver. Preliminary) - Main Functions GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE Note: You can reset a specific counter's count value by executing CounterReset[Counter0, Counter1, Counter2, Counter3]. Internal Camera Blocks To Use the Counter Function Configure the settings as follows. -
Page 80: Action Control Function
User Manual (Ver. Preliminary) - Main Functions GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE Action Control Function Related Setting Items: ActionControl How to use GigE Vision Action Commands The Action Control Function is a function that executes the pre-configured action when the camera receives action commands. -
Page 81: Action Control Example
User Manual (Ver. Preliminary) - Main Functions GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE Action Control Example Assume that the following settings have been pre-configured on the camera. ActionDeviceKey : 0x00001001 ActionGroupMask[1] : 0x00000011 ActionGroupKey[1] : 0x00000001 ActionGroupMask[2] : 0x00000111 ActionGroupKey[2] : 0x00000002 When the camera receives action commands (ActionDeviceKey:0x00001001,... -
Page 82: Event Control Function
User Manual (Ver. Preliminary) - Main Functions GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE Event Control Function Related Setting Items: EventControl The Event Control function is a function that outputs a signal change point inside the camera as information indicative of an event occurrence (event message). -
Page 83: Chunk Data Function
User Manual (Ver. Preliminary) - Main Functions GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE Chunk Data Function Related Setting Items: ChunkDataControl The Chunk Data function adds camera configuration information to the image data that is output from the camera. -
Page 84: Non-Volatile Flash Memory
User Manual (Ver. Preliminary) - Main Functions GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE Cautions: The Timestamp Tick Frequency register value is fixed at 1,000,000,000 (1 GHz). When PTP synchronization is being performed, the Timestamp Reset function is disabled. Because GenICam treats the timestamp (64 bit) as a 64 bit signed integer, 63 bit is actually timestamp data without the sign bit. -
Page 85: Functions That Cannot Be Used Together
User Manual (Ver. Preliminary) - Main Functions GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE Functions That Cannot Be Used Together The table below shows functions that cannot be used with ImageFormatControl, MultiROIControl SequencerControl setting items. Note: For functions that are not in this table, refer to the relevent function topic or setting item topic. -
Page 86: Setting List
User Manual (Ver. Preliminary) - Setting List GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE Setting List This camera complies with GenICam. Each setting item name conforms to GenICam SFNC (Standard Features Naming Convention). (There are some JAI-specific setting items). Each setting item is an integer type (IInteger), a real type (IFloat), an element enumeration type (IEnumeration), a character string (IString), a logical type (IBoolean), and a category type (ICategory) or a command type (ICommand) for executing the function. -
Page 87: Feature Properties
User Manual (Ver. Preliminary) - Setting List GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE Feature Properties Note: Depending on the setting item, you may need to change visibility. Please switch visibility (Beginner / Expert / Guru) as necessary. DeviceControl Display/configure information related to the device. - Page 88 User Manual (Ver. Preliminary) - Setting List GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE Default DeviceControl Item Setting Range Description Value DeviceTLVersionMajor 2 (Fixed) Indicates the major version number of the device's Transport Layer. DeviceTLVersionMinor 0 (Fixed) Indicates the minor version number of the device's Transport Layer.
-
Page 89: Transportlayercontrol
User Manual (Ver. Preliminary) - Setting List GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE TransportLayerControl Display information on transport layer control. Setting TransportLayerControl Item Default Value Description Range PayloadSize Display the payload size. (Include ChunkData) (unit: bytes) GigEVision 0:Single Link GevPhysicalLinkConfiguration... - Page 90 User Manual (Ver. Preliminary) - Setting List GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE Setting TransportLayerControl Item Default Value Description Range GevCurrentDefaultGateway Display the default gateway. Display the current IP configuration status. GevIPConfigurationStatus 2:DHCP Setting Range: 0:None , 1:PersistentIP, 2:DHCP, 3:LLA, 4:ForceIP GevPersistentIPAddress 192.168.0.100 Set the persistent IP address.
- Page 91 User Manual (Ver. Preliminary) - Setting List GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE Setting TransportLayerControl Item Default Value Description Range Control access rights. 0:OpenAccess - Access rights have not been obtained by the application. 0:OpenAccess 1:ExclusiveAccess - Once the application has made this setting, no GevCCP 0～2...
- Page 92 User Manual (Ver. Preliminary) - Setting List GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE Setting TransportLayerControl Item Default Value Description Range Controls the destination IP address of the selected stream channel to which a GVSP transmitter must send data stream GevSCDA or the destination IP address from which a GVSP receiver may receive data stream.
-
Page 93: Imageformatcontrol
User Manual (Ver. Preliminary) - Setting List GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE ImageFormatControl Configure image format settings. Note: Refer to Functions That Cannot Be Used Together for usage restrictions. Setting Default Image Format Control Item Description Range Value... - Page 94 User Manual (Ver. Preliminary) - Setting List GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE Setting Default Image Format Control Item Description Range Value Set the image width. Width Note: This setting is available only when ImageScalingMode=Off. WidthMax Related Topic: ROI Function...
- Page 95 User Manual (Ver. Preliminary) - Setting List GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE Setting Default Image Format Control Item Description Range Value Set the number of pixels in the vertical direction for which to BinningVertical 1～...
- Page 96 User Manual (Ver. Preliminary) - Setting List GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE Setting Default Image Format Control Item Description Range Value ReverseY 0～ 1 Reverse pixels vertically. Related Topic: Image Flip Function SensorDigitizationBits 8: 8 Bits 10: 10 Bits 10: 10 Bits Select the sensor output bits.
- Page 97 User Manual (Ver. Preliminary) - Setting List GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE Setting Default Image Format Control Item Description Range Value GradationCompression Mode 0: Off 0: Off Enables the sensor's gradation compression function. 1: On Related Topic: Gradation Compression Mode...
-
Page 98: Multiroicontrol
User Manual (Ver. Preliminary) - Setting List GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE MultiROIControl Configure settings for Multi ROI. Related Topic: ROI Function (Multi ROI) Note: Refer to Functions That Cannot Be Used Together for usage restrictions. Setting Default Multi ROI Control Item... - Page 99 User Manual (Ver. Preliminary) - Setting List GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE Setting Default Multi ROI Control Item Description Range Value Set the vertical offset for the selected Multi Roi index. Min: The minimum value of the range where each Index does not overlap. MultiRoiOffsetY Max: The maximum value of the range where each Index does not overlap.
-
Page 100: Acquisitioncontrol
User Manual (Ver. Preliminary) - Setting List GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE AcquisitionControl Configure image capture settings. Acquisition Control Setting Range Default Value Description Item AcquisitionMode 0:SingleFrame Related Topic: 1:MultiFrame 2:Continuous Select the image capture mode. Acquisition 2:Continuous Control... - Page 101 User Manual (Ver. Preliminary) - Setting List GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE Acquisition Control Setting Range Default Value Description Item Select the trigger signal source. 7-10: PulseGenerator0-3 11-14: UserOutput0 -3 15-18: Action0-3 TriggerSource 24: Line5 Opt In 19:Software 24: Line5 Opt In 36: Nand0 Out...
-
Page 102: Digitaliocontrol
User Manual (Ver. Preliminary) - Setting List GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE Acquisition Control Setting Range Default Value Description Item Enables RCT mode or BurstTrigger mode. 0: Off ExposureModeOption 1: RCT 0: Off Related Topic: Mode, Burst Trigger Mode 2: BurstTrigger... - Page 103 User Manual (Ver. Preliminary) - Setting List GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE Digital IO Control Setting Default Description Item Range Value Select the line source signal for the item selected in LineSelector. 0: Off (Only when LineSelector is set to TimestampReset) 1: AcquisitionActive 2: FrameActive 4: ExposureActive...
- Page 104 User Manual (Ver. Preliminary) - Setting List GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE Digital IO Control Setting Default Description Item Range Value Set the UserOutput signal. 0: User Output 0 UserOutput 0: User 1: User Output 1 Selector Output 0 2: User Output 2...
-
Page 105: Pulsegenerator
User Manual (Ver. Preliminary) - Setting List GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE PulseGenerator Configure pulse generator settings. Related Topic: Pulse Generator Pulse Generator Item Setting Range Default Value Description Set the division value for the prescaler (12 bit) using 1 ～... - Page 106 User Manual (Ver. Preliminary) - Setting List GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE Pulse Generator Item Setting Range Default Value Description Set the start point of the Low interval in milliseconds. When the counter reaches this value, the output will be 0. The setting range varies depending on the ClockPreScaler PulseGeneratorEndPointMs value.
-
Page 107: Analogcontrol
User Manual (Ver. Preliminary) - Setting List GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE AnalogControl Configure the analog control settings. Analog Control Default Setting Range Description Item Value GainSelector Select the gain to configure. 0: Analog All 0:Analog 1: Digital Red Related Topic:... - Page 108 User Manual (Ver. Preliminary) - Setting List GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE Analog Control Default Setting Range Description Item Value Select the area for which to configure AWBAreaEnable. Note: Color models only. 0: Low Right 1: Low Mid-Right 2: Low Mid-Left 3: Low Left...
-
Page 109: Lutcontrol
User Manual (Ver. Preliminary) - Setting List GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE Analog Control Default Setting Range Description Item Value Gamma Set the gamma value. Related Topic: 0.45～1 0.45 Gamma Setting Range: 0.45, 0.50, 0.55, 0.60, 0.65, 0.75, 0.80, 0.90, 1.00 Function 0: Off LUTMode... -
Page 110: Autolevelcontrol
User Manual (Ver. Preliminary) - Setting List GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE AutoLevelControl Configure AutoLevelControl. Related Topic: ALC (Automatic Level Control) Function Auto Level Control Setting Default Description Item Range Value Sets the channel to be used for ALC control reference. Note: Color models only. - Page 111 User Manual (Ver. Preliminary) - Setting List GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE Auto Level Control Setting Default Description Item Range Value True: Operate ALC with all areas designated as photometry areas, regardless of the individual enabled/disabled photometry area states configured in ALCAreaSelector.
-
Page 112: Imagingcontrol
User Manual (Ver. Preliminary) - Setting List GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE ImagingControl Configure other JAI functions. Imaging Control Item Setting Range Default Value Description VideoProcessBypassMode 0: Off 0: Off Enable/disable VideoProcessBypass mode. 1: On Related Topic: VideoProcessBypassMode EdgeEnhancerEnable... -
Page 113: Shadingcontrol
User Manual (Ver. Preliminary) - Setting List GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE ShadingControl Configure shading correction settings. Related Topic: Shading Correction Setting Default Shading Control Item Description Range Value Select the shading correction method. 0: Flat ShadingCorrectionMode 0: Flat Shading... -
Page 114: Blemishcontrol
User Manual (Ver. Preliminary) - Setting List GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE BlemishControl Configure settings for JAI white blemish correction. Related Topic: BlemishCompensation Setting Default Blemish Control Item Description Range Value Enable/disable blemish correction. 0: Disable all BlemishEnable 1: Enable... -
Page 115: Sequencercontrol
User Manual (Ver. Preliminary) - Setting List GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE Setting Default Blemish Control Item Description Range Value Display the Y coordinate (vertical pixel position) of the target blemish selected in BlemishCompensationIndex. You can also manually enter the Y BlemishCompensation coordinate of the blemish you want to correct. - Page 116 User Manual (Ver. Preliminary) - Setting List GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE Setting Default Sequencer Control Item Description Range Value Set the vertical offset value for the selected SequencerIndex. Setting Range: 0～[Height - Height], Step 2(1)* SequencerOffsetY *For monochrome models, when BinningVertical = 2, the value in parentheses is applicable.
-
Page 117: Counterandtimercontrol
User Manual (Ver. Preliminary) - Setting List GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE CounterAndTimerControl Configure counter settings. Note: This camera only supports the counter functions. Related Topic: Counter and Timer Control Function Counter and Timer Control Setting Default Description... -
Page 118: Actioncontrol
User Manual (Ver. Preliminary) - Setting List GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE ActionControl Configures action control settings. Related Topic: Action Control Function Setting Default Action Control Item Description Range Value 0x00000000 An action command is executed if this ActionDeviceKey matches the DeviceKey 〜... -
Page 119: Eventcontrol
User Manual (Ver. Preliminary) - Setting List GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE EventControl Configure settings for event control. Related Topic: Event Control Function Setting Default Event Control Item Description Range Value Select the event to send the event message. 0: AcquisitionTrigger 0: Acquisition 1: FrameStart... -
Page 120: Chunkdatacontrol
User Manual (Ver. Preliminary) - Setting List GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE ChunkDataControl Configure Chunk Control settings. Related Topic: Chunk Data Function Default Chunk Data Control Item Setting Range Description Value 0: Off ChunkModeActive 0: Off Set whether to enable ChunkData. -
Page 121: Testcontrol
User Manual (Ver. Preliminary) - Setting List GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE TestControl Configure the test control setting. Test Control Setting Default Description Item Range Value PendingAck function test command. The camera waits for TestPendingAck (ms) time and TestPendingAck 0〜... -
Page 122: Miscellaneous
User Manual (Ver. Preliminary) - Miscellaneous GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE Miscellaneous Troubleshooting Check the following before requesting help. If the problem persists, contact your local JAI distributor. Power Supply and Connections Issue: The POWER/TRIG LED remains lit amber and does not turn green, even after power is supplied to the camera. -
Page 123: Specifications
User Manual (Ver. Preliminary) - Miscellaneous GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE Specifications Item Monochrome Color Scanning System Progressive scan, 1 tap Synchronization Internal Interface 1000BASE-T Ethernet (GigE Vision 2.0), IEEE 802.3af Image Sensor Monochrome CMOS Bayer Color CMOS Dark SN Bright SN... - Page 124 User Manual (Ver. Preliminary) - Miscellaneous GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE Item Monochrome Color PixelFormat: Mono10Packed, Mono12Packed, BayerRG10Packed, BayerRG12Packed, BayerGR10Packed, BayerGE12Packed, BayerGB10Packed, BayerGB12Packed, BayerBG10Packed, BayerBG12Packed GOX-5105MC-PGE: TBD fps GOX-8105MC-PGE: TBD fps GOX-12405MC-PGE: TBD fps Acquisition Frame GOX-16205MC-PGE: TBD fps Rate...
- Page 125 GOX-20405MC-PGE: 0 to [4512 (2256) - Height], step2(1) GOX-24505MC-PGE: 0 to [4608 (2304) - Height], step2(1) Note: For monochrome models, when BinningHorizontal = 2 or FD2x2BinningMode = On, the value in parenthesis is applicable. GOX-5105M-PGE: 2472 Digital Image Output GOX-8105M-PGE: 2856 Format: Binning (H) =...
- Page 126 User Manual (Ver. Preliminary) - Miscellaneous GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE Item Monochrome Color GOX-5105M-PGE: 2064 Digital Image Output GOX-8105M-PGE: 2848 Format: GOX-12405M-PGE: 3008 Binning (V) = 1 and GOX-16205M-PGE: 3040 FD2x2BinningMode = GOX-20405M-PGE: 4512...
- Page 127 User Manual (Ver. Preliminary) - Miscellaneous GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE Item Monochrome Color Manual Adjustment Range: AnalogAll (Mono/Color): 0db〜 42dB DigitalRed (Color): -7dB 〜 15dB Gain Adjustment DigitalBlue (Color): -7dB 〜 15dB Adjustment Auto Gain: Off, Continuous, Once WhiteBalanceGain: DigitalRed, DigitalBlue :0.447 ~ 5.624,1STEP = x 0.0001 BalanceWhiteAuto: Off, Continuous, Once, Preset3200K, Preset5000K, Preset6500K, Preset7500K White Balance...
-
Page 128: Package Contents
User Manual (Ver. Preliminary) - Miscellaneous GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE Package Contents Camera (1) Sensor protection cap (1) Dear customer (sheet) (1) Optional Accessories (Sold Separately) MP-46 Tripod Adapter Plate Notes: Design and specifications are subject to change without notice. Approximately 30 minutes of warm-up are required to achieve these specifications. -
Page 129: Spectral Response (Gox-5105M-Pge/Gox-5105C
User Manual (Ver. Preliminary) - Miscellaneous GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE Spectral Response (GOX-5105M-PGE/GOX-5105C-PGE) - 129 -... -
Page 130: Spectral Response (Gox-8105M-Pge/Gox-8105C
User Manual (Ver. Preliminary) - Miscellaneous GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE Spectral Response (GOX-8105M-PGE/GOX-8105C-PGE) - 130 -... -
Page 131: Spectral Response (Gox-12405M-Pge/Gox-12405C
User Manual (Ver. Preliminary) - Miscellaneous GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE Spectral Response (GOX-12405M-PGE/GOX-12405C-PGE) - 131 -... -
Page 132: Spectral Response (Gox-16205M-Pge/Gox-16205C
User Manual (Ver. Preliminary) - Miscellaneous GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE Spectral Response (GOX-16205M-PGE/GOX-16205C-PGE) - 132 -... -
Page 133: Spectral Response (Gox-20405M-Pge/Gox-20405C
User Manual (Ver. Preliminary) - Miscellaneous GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE Spectral Response (GOX-20405M-PGE/GOX-20405C-PGE) - 133 -... -
Page 134: Spectral Response (Gox-24505M-Pge/Gox-24505C
User Manual (Ver. Preliminary) - Miscellaneous GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE Spectral Response (GOX-24505M-PGE/GOX-24505C-PGE) - 134 -... -
Page 135: Dimensions
User Manual (Ver. Preliminary) - Miscellaneous GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE Dimensions Notes: Dimensional tolerance: ± 0.3mm Unit: mm - 135 -... -
Page 136: Comparison Of The Decibel Display And Multiplier Display
User Manual (Ver. Preliminary) - Miscellaneous GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE Comparison of the Decibel Display and Multiplier Display Decibels [dB] Multipliers [X] Remarks 0.501 0.562 0.631 0.708 0.794 0.891 1.122 1.259 1.413 1.585 1.778 1.995 2.239... -
Page 137: User's Record
User Manual (Ver. Preliminary) - Miscellaneous GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE Decibels [dB] Multipliers [X] Remarks 39.811 44.668 50.119 56.234 63.096 70.795 79.433 89.125 112.202 125.893 User's Record Camera type: Go-X Series Global Shutter GigE interface Model name: ……………... -
Page 138: Revision History
User Manual (Ver. Preliminary) - Revision History GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE Revision History Revision Date Changes Preliminary 2022/06/27 Preliminary version. Trademarks Microsoft and Windows are trademarks or registered trademarks of Microsoft Corporation in the United States and other countries. Intel and Intel Core are trademarks of Intel Corporation in the United States and other countries.