Table of Contents
Advertisement
SW-4000TL-10GE | SW-4000TL-SFP | User Manual (2.0)
ROI (Regional Scanning Function)
Related Setting Items:
The ROI (region of interest) function allows you to output images by specifying the areas to scan.
ROI Settings
Specify the area to scan by specifying width and horizontal offset values under
ImageFormatControl. The setting ranges for the ROI function's readable area based on the
Binning setting (Binning Horizontal) are as follows.
BinningHoizontal
1 (Off)
2 (On)
Delayed Readout
Delayed readout allows images captured by a Frame Start trigger command to be stored
temporarily inside the camera (delayed readout buffer) and read out using a FrameTransferStart
trigger after capture.
This function is useful when executing triggers simultaneously on multiple cameras.
Note: This function imposes a heavy processing load on the network bandwidth, as images
from multiple cameras are read out simultaneously. About delayed readout buffer size, refer
to
"Image Output
Timing".
ImageFormatControl
Width (Pixel)
16 ~ 4096, Step 16
8 ~ 2048, Step 8
- 59 -
Main Functions
Offset X (Pixel)
0 ~ 4080, Step 16
0 ~ 2040, Step 8
Advertisement
Table of Contents
