User Set Control; Jai Custom - IAI SP-20000M-PMCL User Manual

SP-20000-PMCL User Manual (Ver. 3.1)

User Set Control

Related Topic: Step 7: Save the Settings
Name Access
UserSetLoad W/O
UserSetSave W/O

JAI Custom

Blemish Compensation
Related Topic: Blemish Compensation
Name Access
BlemishWhiteEnable
BlemishWhiteDetect
BlemishWhiteDetect
Threshold
BlemishWhiteDetect
PositionX
Short
Values
ASCII
0: Default
1: UserSet1
LD
2: UserSet2
3: UserSet3
1: UserSet1
SA 2: UserSet2
3: UserSet3
Short Min ~
ASCII Max
0:
R/W BMW False
1: True
W/O BMRCW 0
R/W BMTHW 0 ~ 100
0 ~
R/W BMPXW
1919
Default
LD=[Param.]<CR><LF>
LD?<CR><LF>
0
Load user settings.
SA=[Param.]<CR><LF>
SA?<CR><LF>
1
Save the current setting values as user settings.
Default
BMW=[Param.]<CR><LF>
BMW?<CR><LF>
0
Enable/disable blemish correction.
BMRCW=0<CR><LF>
-
Execute blemish detection.
BMTHW=[Param.]<CR><LF>
BMTHW?<CR><LF>
10
Set the blemish detection threshold.
BMPXW=[Param.]<CR><LF>
BMPXW? [Param.]<CR><LF>
0
Display the X coordinate (horizontal pixel position) of the blemish
selected in Blemish Data Index. You can also manually enter the X
coordinate of the blemish you want to correct.
- 125 -
Short ASCII Command List
Description
Description