② Direct Mounting (Or Use Mp-46 Tripod Adapter Plate); ③ Lan Cable; ➃ Network Card; ⑤ Dc In / Trigger In Connection Cable - IAI GOX-5105M-PGE User Manual

GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE
Cautions:
The maximum performance of the camera may not be realized depending on the lens.
l
Attaching a lens with a mount protrusion of 9 mm or longer may damage the lens or camera.
l
② Direct Mounting (or Use MP-46 Tripod Adapter Plate)
When mounting the camera directly to a wall or other device, use screws that match the camera
locking screw holes on the camera (M3: depth 4mm for the lower part, depth 3 mm for the upper part).
Use the supplied screws to attach the tripod adapter plate (lower mounting holes).
Caution: For heavy lenses, be sure to support the lens itself. Do not use configurations in which
its weight is supported by the camera.
③ LAN Cable
Connect a LAN cable to the RJ-45 connector.
Use a LAN cable that is Category 5e or higher (Category 6 recommended).
l
Use a LAN cable that is an STP cable.
l
When supplying power via PoE, connect to a PoE-compatible switching hub or a PoE-
l
compatible network card.
Refer to the specifications of the cable for details on its bend radius.
l
Caution: See the
➃ Network Card
Install this in the computer that will be used to configure and operate the camera. As the camera
supports PoE, you can also use PoE-compatible network cards. Refer to the instruction manual of the
network card, and configure settings on the computer as necessary.
⑤ DC IN / Trigger IN Connection Cable
Performs external I/O such as power supply and trigger input.
Notes on LAN Cable Connection
User Manual (Ver. Preliminary) - Preparation
topic as well.
- 23 -