IAI SP-20000M-PMCL User Manual page 126

SP-20000-PMCL User Manual (Ver. 3.1)
Name Access
BlemishWhiteDetect
R/W
PositionY
Shading Correction
Related Topic: Shading Correction
Name
ShadingCorrection
Mode
ShadingCorrect
RequestShadingDetect
Result
ShadingMode
Short Min ~
ASCII Max
0 ~
BMPYW
1439
Short
Access Min ~ Max
ASCII
0: Flat
Shading
1: Color
R/W SDCM
Shading
(Color model
only)
W/O RS -
0=Complete.
1=Too Bright.
2=Too dark.
3=Timeout
R/O SDRS Error.
4=Busy.
5=Limit.
6= Trig is not
set as Normal.
0: OFF
1: User 1
R/W SDM
2: User 2
3: User 3
Default
BMPYW=[Param1],[Param2]<CR><LF>
BMPYW? [Param1]<CR><LF>
0
Display the Y coordinate (vertical pixel position) of the blemish
selected in Blemish Data Index. You can also manually enter the Y
coordinate of the blemish you want to correct.
Default
SDCM=[Param.]<CR><LF>
SDCM?<CR><LF>
0
Select the shading correction mode.
RS=0<CR><LF>
-
Execute shading correction.
SDRS?<CR><LF>
-
Display the shading correction results.
SDM=[Param.]<CR><LF>
SDM?<CR><LF>
0
Set the storage area for the shading correction data. When
this is set to Off, the shading correction data is not saved.
- 126 -
Short ASCII Command List
Description
Description