② Mounting (Or Use Mp-42 Tripod Adapter Plate); ③ Camera Link Cable; ④ Frame Grabber Board; ⑤ Dc In / Trigger In Connection Cable - IAI SP-20000M-PMCL User Manual

SP-20000-PMCL User Manual (Ver. 3.1)
Focal length = WD / (1 + W/w)
WD: Working distance (distance between lens and object)
W: Width of object
w: Width of sensor (= 8.5mm)
② Mounting (or Use MP-42 Tripod Adapter Plate)
When mounting the camera directly to a wall or other device, use screws that match the mounting
holes on the camera (see
Use the supplied screws to attach the tripod adapter plate.
Caution: For heavy lenses, be sure to support the lens itself. Do not use configurations in which
its weight is supported by the camera.
③ Camera Link Cable
Connect the Camera Link cable to the Mini Camera Link connector.
Use a cable that supports the Camera Link standard and is compatible with Mini Camera Link (SDR)
l
connectors.
Refer to the specifications of the cable for details on its bend radius.
l
For details on the cable, see
l
Caution: Refer to
connectors.
④ Frame Grabber Board
Refer to the operating instructions of the frame grabber board and configure settings on the computer
as necessary. (Use a computer that meets the requirements of your frame grabber board).
⑤ DC IN / Trigger IN Connection Cable
Performs external I/O such as power supply and trigger input.
⑦ ⑧ Mounting Holes (M3)
⑤ ⑥ Camera Link Connector 2 &
Notes on Camera Link Cable Connections
for more information).
1.
when connecting the cables to the
- 21 -
Preparation