IAI SP-20000M-PMCL User Manual page 143

SP-20000-PMCL User Manual (Ver. 3.1)
Item
ALC
Gamma
LUT
Shading Correction
Vibration Resistance
Shock Resistance
Power
Lens Mount
Flange Back
Optical Filter
Verified Performance Temperature /
Humidity
Operating temperature / Humidity
(Performance guaranteed)
Storage Temp. / Humidity
Regulations
Dimensions (Housing)
Weight
AGC and Auto Exposure can be combined and automatically controlled
0.45 ~ 1.0 (8 steps available)
OFF: γ = 1.0, ON = 256 points can be set
Mono: Flat field Block based (20 x 15 blocks) Each block: 256 x 256 pixels
Color: Flat field, Color shading Block based (20 x 15 blocks) Each block: 256 x 256 pixels
10G (20 Hz ~ 200 Hz X-Y-Z direction)
80G
Input: DC+12V to +24V ± 10% (at the input terminal)
Current: 450mA ± 10% (12V input, full image), 480mA ± 10% (12V input, 8 lines ROI)
Consumption: 5.4W ± 10% (12V input, full image), 5.6W ± 10% (12V input, 8 lines ROI)
F mount, Rear protrusion of the lens is less than 40 mm.
M42A mount, Rear protrusion of the lens is less than 9 mm.
F mount : 46.5 mm, Tolerance 0 to -0.05 mm
M42A mount : 16.0 mm, Tolerance 0 to -0.05 mm
Mono: Protection glass not provided
Color: Optical Low Pass filter + IR cut filter (Half value is 670 nm)
- 5°C ~ + 45°C / 20% ~ 80% (non-condensing)
-45°C to +70°C / 20 – 80% (non-condensing)
-45°C to +70°C / 20% - 80 % (non-condensing)
CE (EN61000-6-2 and EN61000-6-3), FCC part 15 class B, RoHS, WEEE, KC
F Mount: 62mm × 62mm × 84.5mm (Excluding Mount Protrusions)
M42A Mount: 62mm x 62mm x 54mm (Excluding Mount Protrusions)
F Mount: 320g
M42A Mount: 265g
- 143 -
Description
Miscellaneous