Frame Rate Interval Setting Range (Typical Value) In Continuous Trigger Mode - IAI SP-20000M-PMCL User Manual

SP-20000-PMCL User Manual (Ver. 3.1)
Frame Rate Interval Setting Range (Typical Value) in Continuous Trigger
Mode
Camera Settings
Camera
Tap Link Binning
Geometry Pixel Vertical
Clock
1 (Off)
80 MHz
2 (On)
1X8-1Y
1 (Off)
60 MHz
2 (On)
1 (Off)
80 MHz
2 (On)
1X4-1Y
1 (Off)
60 MHz
2 (On)
1 (Off)
80 MHz
2 (On)
1X2-1Y
1 (Off)
60 MHz
2 (On)
Notes:
The above reference value is the setting range to which frame interval is automatically changed if
l
Height is set at Height Max. In vertical ROI operation, if Height is set at less than Height Max, the
minimum setting value will be smaller.
On this camera, the frame rate in 1X8-1Y and Full Line setting can be set at a maximum of 31.254
l
fps. However, it is only guaranteed up to 30 fps in terms of performance.
Height
Setting Actual operating time/Actual
Value operating interval
3840 31995
1920 31978
3840 42965
1920 42942
3840 63990
1920 63957
3840 85929
1920 85885
3840 127981
1920 127915
3840 171860
1920 171772
ART Command value (limited standard value)
Min.
Setting
31.996 ms /
31.254 Hz
31.979 ms /
31.271 Hz
42.966 ms /
23.274 Hz
42.942 ms /
23.287 Hz
63.992 ms /
15.627 Hz
63.959 ms /
15.635 Hz
8000000
11.637 Hz
85.933 ms
85.889 ms /
11.643 Hz
127.982 ms /
7.8136 Hz
127.916 ms /
7.8176 Hz
171.860 ms /
5.8187 Hz
171.771 ms /
5.8217 Hz
- 58 -
Main Functions
Max.
Actual operating time/Actual
Value operating interval
8 sec / 0.125 Hz