④ Dc In / Trigger In Connector (12-Pin Round) - IAI SP-20000M-PMCL User Manual

SP-20000-PMCL User Manual (Ver. 3.1)
④ DC IN / Trigger IN Connector (12-pin Round)
Connect the cable for DC IN / Trigger IN here.
Type: HR-10A-10R-12PB(72) Hirose male or equivalent. Use the part number HR10A-10P-
12S or equivalent for the cable side.
Hirose 12-pin
Connector
Notes:
Factory default setting is Exposure Active and negative. Although Exposure Active is positive in the
l
inside of the camera, it is output from TTL Out 1 after being inverted to negative.
Factory default setting is trigger input.
l
No Signal
1 GND
2 DC Input
3 GND
4 Video Iris
5 NC
6 NC
7 NC
8 NC
9 TTL Out 1
10 TTL In 1
11 DC Input
12 GND
- 17 -
Parts Identification
Remarks
+12V ~ +24V
For lens auto iris
Line1 (Note 1)
Line4 (Note 2)
+12V ~ +24V