IAI SP-20000M-PMCL User Manual page 4

SP-20000-PMCL User Manual (Ver. 3.1)
ROI Setting Examples (1/2)
ROI Setting Examples (2/2) (Frame Rate)
Mirroring Function
Digital Output Bit Allocation
Acquisition Control (Change the Frame Rate)
Interval Calculation of Frame Rate (In Continuous Trigger mode)
Frame Rate Interval Setting Range (Typical Value) in Continuous Trigger Mode
Exposure Mode
ExposureTime
Behavior if Trigger Overlap is Set to Readout
Calculation for the Period Which the Exposure Time is Overlapped with Previous Trigger in
Continuous Trigger Mode
Tap Geometry: 1X8-1Y
Tap Geometry: 1X4-1Y
Tap Geometry: 1X2-1Y
ExposureAuto
Trigger Control
Normal Continuous Operation (Timed Exposure Mode/Trigger Mode OFF)
Timed (EPS) Mode
Trigger Overlap = Off (Timed Mode)
Trigger Overlap = Readout (Timed Mode)
Calculation Formula for the Minimum Trigger Interval (Trigger Overlap = Off, Timed Mode)
Calculation Formula for the Minimum Trigger Interval (Trigger Overlap = Readout, Timed Mode) 75
GPIO TTL Output Timing (Trigger Overlap = Off, Timed Mode)
GPIO TTL Output Timing (Trigger Overlap = Readout, Timed Mode)
TriggerWidth Mode
Trigger Overlap = OFF (TriggerWidth Mode)
Trigger Overlap = Readout (TriggerWidth Mode)
Minimum Trigger Interval Calculation Formula (Trigger Overlap = Off, TriggerWidth Mode)
Minimum Trigger Interval Calculation Formula (Trigger Overlap = Readout, TriggerWidth Mode) 89
PIV (Particle Image Velocimetry)
Sequential Timed Exposure Mode
- 4 -
Table of Contents
52
53
54
55
56
57
58
59
60
61
63
63
65
66
67
68
70
71
72
73
74
78
81
84
85
86
88
92
98