SP-20000-PMCL User Manual (Ver. 3.1)
Sequential Timed Exposure Mode
This is a function to capture images in sequence based preset ROI, Exposure Time, Gain and other
parameters in the sequence index table.
Video Send Mode
In order activate this function, Video Send Mode should be set to Trigger Sequence.
Minimum Trigger Interval (Trigger Overlap = Off)
Readout Mode
≧ 31.761ms ≧ 42.648ms ≧ 63.200ms ≧ 84.864ms ≧ 126.389ms ≧ 169.719ms
Full
≧ 21.287ms ≧ 28.582ms ≧ 42.252ms ≧ 56.734ms ≧ 84.492ms
ROI Center 2/3
≧ 16.050ms ≧ 21.550ms ≧ 31.777ms ≧ 42.669ms ≧ 63.544ms
ROI Center 1/2
≧ 8.195ms
ROI Center 1/4
ROI Center 1/8
≧ 4.267ms
V Binning ON (Full) ≧ 31.770ms ≧ 42.658ms ≧ 63.216ms ≧ 84.887ms ≧ 126.423ms ≧ 169.764ms
*Monochrome model only
Notes:
Overlap mode=Readout is not available.
l
The minimum interval calculation assumes that the exposure time for all sequences are equal. If
l
there are differences, it is necessary to add the difference to the calculation. If the exposure times are
different, it is recommended to organize the exposure times from the shortest exposure to the longest
1x8 – 1Y
1x8 – 1Y
1x4 – 1Y
≧ 11.001ms ≧ 16.066ms ≧ 21.571ms ≧ 32.121ms
≧ 5.726ms
Time (Min. Trigger Period)
1x4 – 1Y
1X2 – 1Y
1x8 – 1Y
≧ 8.211ms
≧ 11.022ms ≧ 16.410ms
- 98 -
Main Functions
1X2 – 1Y
1x4 – 1Y
1X2 – 1Y
≧ 113.457ms
≧ 85.327ms
≧ 43.131ms
≧ 22.033ms