Camera Link Pixel Clock - IAI SP-20000M-PMCL User Manual

SP-20000-PMCL User Manual (Ver. 3.1)
If you use 80-bit (8Tap/10-bit) camera configuration, DVAL and Exposure Active (JAI custom) are not
l
output through the Camera Link interface. FVAL is only output via Digital I/O-1 connector.

Camera Link Pixel Clock

Related Setting Items:
This camera uses the Camera Link pixel clock of 80 MHz as the default setting. It can be changed
(SensorClockFrequency).
Camera Link Pixel
Clock Frequency
80 MHz
60 MHz
Note: If the Camera Link pixel clock is changed, the output is immediately changed but it may take
a few seconds for the output signal to be stable.
JAI Custom
Tap Geometry
1X8-1Y
1X4-1Y
1X2-1Y
1X8-1Y
1X4-1Y
1X2-1Y
Camera Link Configuration
80 bit, Full (Default)
Medium
Base
80 bit, Full
Medium
Base
- 31 -
Main Functions