IAI SP-20000M-PMCL User Manual page 82

SP-20000-PMCL User Manual (Ver. 3.1)
Description
FVAL Falling Edge to Frame
(h)
Active Falling Edge
Frame Trigger wait Falling Edge to
(i)
Frame Active Raising Edge
Frame Active Raising Edge to
(j)
Exposure Active Raising Edge
Frame Start Trigger to Exposure
(k)
Active Raising Edge
Exposure Active Raising Edge
(l)
Variableness
Exposure Active Start Edge:
-
CL/TTL out phase difference
Exposure Active End Edge:
-
CL/TTL out phase difference
Note: The timing in this table is in the condition that the trigger pulse is not input during the video
readout from the previous trigger. This is for the explanation of the phase relation between Frame
Trigger Wait and Frame Active.
GPIO Output Timing (Reference) (60 MHz, EPS Trigger, Trigger Overlap = Readout )
Description
Frame Start Trigger to Frame
(a)
Trigger Waite Falling Edge
Frame Start Trigger to Frame
(b)
Trigger Waite Falling Edge
Exposure Active Falling Edge to
(c)
FVAL Raising Edge
Frame Trigger Wait Raising
(d) Edge to Frame Active Falling
Edge
(e) Exposure Active
Tap Geometry Setting
1X8-1Y 1X4-1Y 1X2-1Y
1.10 us 1.27 us 370 ns
1.22 us 1.22 us 1.22 us
0 ns 0 ns 0 ns
2.04 us 2.04 us 1.01 us
(470 ns) (470 ns) (660 ns)
31.50 62.93 125.87
ms ms ms
1.58 us 1.58 us 1.58 us
230 ns 230 ns 230 ns
Tap Geometry Setting
1X8-1Y 1X4-1Y 1X2-1Y
890 ns 890 ns 1.160 us
429 us 440 us 881 us
(430 us) (441 us) (882us)
7.21 us 7.21 us 7.21 us
9.04 us 9.04 us 9.09 us
(10.37 (10.37 (10.44
us) us) us)
42.20 84.39 125.69
ms ms ms
- 82 -
If Binning off and [Height]=3840, (Will be changed by
Height setting)
Exposure Active at TTL I/F ( ) is if comparing with
Exposure Active which is assigned to Camera Link Spare
Bit
Varies by Exposure Time setting
Note
Varies by Tap Geometry setting.
Exposure Time=10us
Exposure Time=10us
( ) is Exposure Active which is assigned to Camera Link
Spare Bit
If Binning off and Height =3840, (Will be changed by Height
setting)
Main Functions
Note