Gpio Ttl Output Timing (Trigger Overlap = Readout, Timed Mode) - IAI SP-20000M-PMCL User Manual

SP-20000-PMCL User Manual (Ver. 3.1)

GPIO TTL Output Timing (Trigger Overlap = Readout, Timed Mode)

GPIO Timing (Overlap = Readout)
GPIO Output Timing (Reference) (80 MHz, EPS Trigger, Trigger Overlap = Readout )
Description
Frame Start Trigger to Frame
(a)
Trigger Waite Falling Edge
Exposure Active Falling Edge to
(b)
FVAL Raising Edge
Frame Trigger Wait Raising Edge
(c)
to Frame Active Falling Edge
(d) Exposure Active
(e) FVAL Active
(f) Frame Active
Exposure Active Falling Edge to
(g)
Frame Trigger Wait Raising Edge
Tap Geometry Setting
1X8-1Y 1X4-1Y 1X2-1Y
810 ns 810 ns 1.010 us
320 us 328 us 656 us
(320 us) (328 us) (656 us)
7.15 us 7.15 us 7.15 us Phase if Exposure Time is set to 10us
8.93 us 8.93 us 9.00 us
(10.28 (10.28 (10.33
us) us) us)
31.42 62.84 125.69
ms ms ms
31.75 63.18 126.36
ms ms ms
241.03 231.84 470.81
us us us
- 81 -
Note
Varies by Tap Geometry setting.
Exposure Time=10us
( ) is Exposure Active which is assigned to Camera Link
Spare Bit
If Binning off and [Height]=3840, (Will be changed by
Height setting)
Exposure Mode = Timed
Main Functions