➃ Network Card; ⑤ Dc In / Trigger In Connection Cable; ⑥ Ac Adapter (Power Supply) (If Necessary); Step 3: Verify Camera Operation - IAI GOX-5105M-5GE User Manual

Tentative version

Table of Contents

User Manual (Ver. Tentative) - Preparation

➃ Network Card

Install this in the computer that will be used to configure and operate the camera. As the camera

supports PoE, you can also use PoE-compatible network cards. Refer to the instruction manual of the

network card, and configure settings on the computer as necessary.

⑤ DC IN / Trigger IN Connection Cable

Performs external I/O such as power supply and trigger input.

⑥ AC Adapter (Power Supply) (If Necessary)

Connect the AC adapter and the round connector of the connection cable to the DC IN / Trigger IN

connector on the camera.

When power is supplied to the camera while the necessary equipment is connected, the

POWER/TRIG LED at the rear of the camera lights amber, and initialization of the camera starts.

When initialization is complete, the POWER/TRIG LED lights green.

Verify whether power is being supplied to the camera by checking the rear LED. When properly turned

on, the power LED is lit green.

For details on how to read the LEDs, see the

⑤ POWER/TRIG LED

section.

- 24 -

Table of Contents