Table of Contents
Advertisement
SP-20000-PMCL User Manual (Ver. 3.1)
GPIO (Digital Input/Output Settings)
Related Setting Items:
The camera can input/output the following signals to and from external input/output connectors.
Line Selector
Line Selector
Line 1 TTL 1 Out
Line 8 TTL 2 Out
Line 9 TTL 3 Out
NAND 0 In 1
NAND 0 in 2
NAND 1 In 1
NAND 1 in 2
Line Source
Line source signal can be selected from the following table to connect it to the line item which is
selected in the Line Selector.
0: Low, 1: High, 3: FrameTrigger Wait, 4: FrameActive, 5: ExposureActive, 6: Fval, 8: PulseGenerator0,
l
9: PulseGenerator1, 10: PulseGenerator2, 11: PulseGenerator3, 12: TTL_In, 13: CL_CC1_In, 14:
Nand0, 15: Nand1, 16:TTL_In2, 17:LVDS_In
Note: As for LVAL, some line items cannot be connected. Refer to
Matrix."
Line Inverter
Inverts the signal polarity for the item selected in Line Selector. (False=Positive, True=Negative)
Line Status
Indicates the status of the selected signal (input or output) (True=High, False=Low)
Line Format
Controls the format of the line item selected in Line Selector.
Digital IO Control
TTL output from # 9 pin of DC In/Trigger 12-Pin on the rear
TTL output from #1pin "AUX" HIROSE 10-Pin on the rear
TTL output from #2pin "AUX" HIROSE 10-Pin on the rear
First input at NAND first gate in GPIO
Second input at NAND first gate in GPIO
First input at NAND second gate in GPIO
Second input at NAND second gate in GPIO
Description
"Operation and Function
- 32 -
Main Functions
Advertisement
Table of Contents
