SP-20000-PMCL User Manual (Ver. 3.1)
Step 5: Adjust the Image Quality
Related Setting Items:
Display the camera image and adjust the image quality.
1. Display the image. Display the image captured by the camera. Please display the image with the viewer
on the frame grabber board application.
2. Adjust the Gain. For more information, see
3. Adjust the White Balance. For more information, see
4. Adjsut the Black Level. For more information, see
Step 6: Configuring Various Other Settings
See
"Short ASCII Command
Step 7: Save the Settings
Related Setting Items:
The configured setting values will be deleted when the camera is turned off. By saving current setting
values to user memory, you can load and recall them whenever necessary. You can save up to three
sets of user settings in the camera. (User Set1 to 3)
Analog Control
Gain
List" and configure settings as necessary.
User Set Control
Control.
Balance White
Auto.
Black Level
Control.
- 26 -
Preparation