Gain Auto - IAI SP-20000M-PMCL User Manual

SP-20000-PMCL User Manual (Ver. 3.1)

Gain Auto

This provides automatic control of the gain level. There are three modes.
OFF: Adjust manually.
l
Once: Operate only one time when this command is set
l
Continuous: Operate the auto gain continuously
l
The following detailed settings are also available.
ALC Speed: The rate of adjustment of GainAuto can be set (Common with Exposure Auto)
l
GainAuto Max: The maximum value of GainAuto control range can be set
l
GainAuto Min: The minimum value of GainAuto control range can be set
l
ALC Reference: The reference level of Gain Auto control can be set (Common with Exposure Auto)
l
ALC Channel Area: The measurement area of GainAuto control can be set, either entire area or
l
individual section
Detection Area
High
HighLeft
MidLeft
MidHigh MidHigh
Left MidLeft
MidLow MidLow
Left MidLeft
Low
LowLeft
MidLeft
High
HighRight
MidRight
MidHigh MidHigh
MidRight Right
MidLow MidLow
MidRight Right
Low
LowRight
MidRight
- 107 -
Main Functions