Step 4: Configure Basic Settings For The Camera; Configure The Camera Output Formats - IAI SW-4000T-MCL User Manual

SW-4000T-MCL User Manual (2.0)

Step 4: Configure Basic Settings for the Camera

Configure the Camera Output Formats

Configure the pixel formats of the image output.
1. To check the current pixel format setting, enter the command BA?<CR><LF> from the
terminal emulator software. The default setting is RGB8 (BA=0).
2. To change the pixel format setting to RGB10, enter BA=1<CR><LF>.
Note: For the details on the short ASCII commands required to configure the Output format
settings, see "Image Format Control".
- 24 -
Preparation