Table of Contents
Advertisement
SW-4000TL-10GE | SW-4000TL-SFP | User Manual (2.0)
GPIO (Digital Input/Output Settings)
Related Setting Items:
The camera can input/output the following signals to and from external input/output connectors.
External Output
External Output
These signals can be used as triggers and other necessary signals within the camera or as
signals output from the camera to the system, such as those used for lighting equipment control.
Signals are selected as follows.
When using external signals or the signals of each GPIO module as trigger signals:
l
Select in TriggerSource [TriggerSelector] (AcquisitionControl).
When selecting the signals to use for external outputs:
l
Select in LineSource [LineSelector] (DigitalIOControl).
Camera Output Formats
Related Setting Items:
Pixel Format Alignments for GigE Vision
This camera supports the following output formats.
RGB8
l
RGB10V1Packed
l
RGB10p32
l
YUV422_8_UYVY
l
YUV422_8
l
DigitalIOControl
Line1 TTL Out 1
Line8 TTL Out 2
Line9 TTL Out 3
Line12 TTL Out 4
Line4 TTL In 1
Line5 Opt In 1
Line10 TTL In 2
Line13 TTL In 3
ImageFormatControl
- 35 -
DC IN / TRIG IN Connector (12-pin)
AUX Connector (10-pin)
DC IN / TRIG IN Connector (12-pin)
DC IN / TRIG IN Connector (12-pin)
AUX Connector (10-pin)
Main Functions
Advertisement
Table of Contents
