Camera Output Format; Pixel Format - IAI GO-5000M-USB User Manual

7.2.

Camera output format

The following table shows the relationship between camera output and sensor readout system.
Camera output format
1X–1Y
Note: The description of camera output format is based on GenICam SFNC Ver.1.5.1.
7.2.1 1X-1Y
1X–1Y is defined in GenICam SFNC Ver.1.5.1 for 1-tap readout and the readout system is the
following.
Tap 1
Pixel(0,0)
7.3

Pixel Format

7.3.1 Pixel Format
Model
GO-5000M-USB
GO-5000C-USB
GO-5000M-USB / GO-5000C-USB
Sensor readout system
1-tap readout
X5 X6 X7
X1 X2 X3 X4
Y1 Y1 Y1
Y1 Y1 Y1 Y1
X1
Y2
X1
Y2047
X5 X6 X7
X1 X2 X3 X4
Y2048 Y2048 Y2048 Y2048 Y2048 Y2048 Y2048
Width = 2560 Pixel
Fig.16 1X – 1Y readout
Supported Pixel Formats
Mono8, Mono10, Mono12, Mono10_Packed, Mono12_Packed
BayGR8, BayGR10, BayGR12 ,BayerGR10_Packed, BayerGR12_Packed
Reference figure
7.2.1
X8
X2053 X2054 X2055 X2056 X2057
Y1 Y1 Y1 Y1 Y1 Y1
X8 X2553 X2554 X2555 X2556 X2557
Y2048 Y2048 Y2048 Y2048 Y2048 Y2048
- 24 -
Step X = 1
X5120
X2058 X2059
X2056
Y1 Y1
Y1
Y1
X2056
Y2
X2560
Y2047
X5120
X2558 X2559
X2560
Y2048 Y2048 Y2048
Y3840