Gpio (Digital Input/Output Settings) - IAI GOX-5105M-PGE User Manual

GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE

GPIO (Digital Input/Output Settings)

Related Setting Items:
The camera can input/output the following signals to and from external input/output connectors.
External Output
Internal Output
These signals can be used as triggers and other necessary signals within the camera or as signals
output from the camera to the system, such as those used for lighting equipment control.
Use the DigitalIOControl
check LineMode, LineFormat, and set LineInverter. You can also check the status of each digital I/O
as shown in the table below with LineStatusAll.
LineSelector
Line2 (Opt Output1)
Line5 (Opt In 2)
Nand0In1
Nand0In2
Nand1In1
Nand1In2
TimestampReset
For digital output, set the output source signal using LineSource. Set the source signal in the same
way for NAND Logic (Nand0In1, Nand0In2, Nand1In1, NandIn2) and TimestampReset.
DigitalIOControl
Line2 : Opt Out
Line5 : Opt In
to set the digital input/output. Select input or output in LineSelector, you can
LineMode LineFormat
Output OptCoupled
Input OptCoupled
Input InternalSignal
Input InternalSignal
Input InternalSignal
Input InternalSignal
Internal
InternalSignal
Connection
User Manual (Ver. Preliminary) - Main Functions
DC IN / TRIG IN Connector (6-pin round)
DC IN / TRIG IN Connector (6-pin round)
LineInverter
True/False
False (fixed)
True/False
True/False
True/False
True/False
False (fixed)
- 45 -
LineStatusAll
DC IN / TRG
bit1
IN connector
DC IN / TRG
bit4
IN connector
bit12
bit13
bit14
bit15