⑥ Ac Adapter (Power Supply) (If Necessary); Step 3: Verify Camera Operation; Step 4: Verify The Connection Between The Camera And Pc - IAI GOX-5105M-PGE User Manual

User Manual (Ver. Preliminary) - Preparation
GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE
⑥ AC Adapter (Power Supply) (If Necessary)
Connect the AC adapter and the round connector of the connection cable to the DC IN / Trigger IN
connector on the camera.

Step 3: Verify Camera Operation

When power is supplied to the camera while the necessary equipment is connected, the
POWER/TRIG LED at the rear of the camera lights amber, and initialization of the camera starts.
When initialization is complete, the POWER/TRIG LED lights green.
Verify whether power is being supplied to the camera by checking the rear LED. When properly turned
on, the power LED is lit green.
For details on how to read the LEDs, see the ⑤ POWER/TRIG LED section.

Step 4: Verify the Connection between the Camera and PC

Verify whether the camera is properly recognized via Control Tool.
1. Launch eBUS Player for JAI
eBUS Player for JAI startup screen appears.
- 24 -