Table of Contents
Advertisement
SW-4000TL-10GE | SW-4000TL-SFP | User Manual (2.0)
③ LAN Cable (SW-4000TL-10GE)
Connect a LAN cable to the RJ-45 connector.
The camera supports the following Ethernet standards: 1000Base-T, 2.5GBase-T, 5GBase-
l
T, 10GBase-T
The longest cable length varies depending on the type of LAN cable and the Ethernet
l
standard. Below, the table shows the relationship diagram between LAN cable type and
Ethernet standard. Correctly select the LAN cable type according to the Ethernet standard
to be used.
Longest Cable Length
1000Base-T
2.5GBase-T
5GBase-T
10GBase-T
Refer to the specifications of the cable for details on its bend radius.
l
Caution:
See the
➃ Network Card (SW-4000TL-10GE)
Install this in the computer that will be used to configure and operate the camera. Refer to the
instruction manual of the network card, and configure settings on the computer as necessary.
⑤ DC IN / Trigger IN Connection Cable
Performs external I/O such as power supply and trigger input.
⑥ AC Adapter (Power Supply)
Connect the AC adapter and the round connector of the connection cable to the DC IN / Trigger IN
connector on the camera.
Cat5e
100m
100m
-
-
Notes on LAN Cable Connection
Cat6/Cat6e
100m
100m
100m
55m
topic as well.
- 22 -
Preparation
Cat6A
Cat7
100m
100m
100m
100m
100m
100m
100m
100m
Advertisement
Table of Contents
