Displaying Min./Max. Values - TESTO 6381 Instruction Manual

7 Parameterizing, adjusting and analyzing software (P2A software)
7.3.3.5.

Displaying min./max. values

The transmitter saves the minimum or maximum value for each
channel (measured since the last voltage supply or since the last
manual reset).
✓ The required instrument file is marked.
1. Click on [Test/analyze transmitter].
- The
dialogue is opened with the
2. Mark
Field/button
Min./max. values
Channel
Value
Unit
3. Reset
4. Click on
5. Confirm control query to perform the reset.
- The values are reset to the factory settings.
6. Click on
Properties of <Instrument type> <Serial number>
Min./max. values.
Explanation
View the min./max. values of each channel.
Only the values within the measuring range
are shown.
Min./max. of channel 1/2/3 (optional)
Min. or max. value, 1 decimal place.
Unit selected in
Min./max. values.
[Reset min./max.
[OK] or [Cancel]
Test/analyze transmitter
Unit/analog
values].
to close the dialogue.
register.
output.
157