Tips And Assistance; Questions And Answers; Accessories And Spare Parts - TESTO 6381 Instruction Manual

8 Tips and assistance

8 Tips and assistance
8.1.

Questions and answers

Question
Connection to instrument
cannot be established
A message appears on the
display
Malfunction (with and
without display)
Undo adjustment
When does a stable
current reading appear?
If we could not answer your question, please contact your dealer or
Testo Customer Service. For contact details see the rear side of
this document or the web page www.testo.com/service-contact
8.2.

Accessories and spare parts

Description
Ethernet
Ethernet module
Ethernet connector
Interface and software
P2A software (parameterizing, adjusting,
analyzing) incl. USB adapter
168
An overview of the probes that can be used with the testo
6381 can be found in volume 1, 4.2.2. Usable probes.
Possible causes/solution
Check connection cable/plug contacts
See volume 1, 4.5. Status, warning
and error messages
Analysis using the P2A software, see
7.3.5. Transmitter history
A 1-point temperature/humidity
adjustment can be reset to the current
readings using [Set offset to zero]
The actual values before the
adjustment can be read out from the
corresponding history table.
2-point adjustments and analog
adjustments can only be undone by
means of a factory reset.
After approx. 20 seconds
Article no.
0554 6656
0554 6653
0554 6020