7 Parameterizing, adjusting and analyzing software (P2A software)
Action
Test switch outputs Manually switch relays 1 to 4 to test for
Display min./max.
values
3. Click on
7.3.3.2.
Carrying out factory reset
✓ The required instrument file is marked.
1. Click on
-
The
dialogue is opened with the
2. Mark transmitter test.
-
Current operating hours are shown.
3. Confirm control query to perform the reset.
-
The values are reset to the customer-specific factory settings.
4. Click on
7.3.3.3.
Testing analog output
✓ The required instrument file is marked.
1. Click on
-
The
dialogue is opened with the
2. Mark channel and test values.
154
Explanation
proper function (see 7.3.3.4. Testing switch
output relays 1 to 4).
Overview of the minimum and maximum
values measured since the last reset of the
transmitter (see 7.3.3.5. Displaying min./max.
values).
[OK]
or
[Cancel]
[Test/analyze
Properties of <Instrument type> <Serial number>
[OK]
or
[Cancel]
[Test/analyze
Properties of <Instrument type> <Serial number>
to close the dialogue.
transmitter].
Test/analyze transmitter
to close the dialogue.
transmitter].
Test/analyze transmitter
register.
register.