sales@GlobalTestSupply.com
The instrument returns to measurement view.
7.2
Measuring
Damage to sensor possible!
- Do not touch sensor!
The instrument is switched on and is in the measurement view.
1
Place the measuring instrument into the position in which the
measurement is to be carried out.
Read the measured values on the display.
7.2.1
Freezing a reading, displaying the
maximum/minimum value
The current reading can be frozen. The maximum and minimum values since
the last time the instrument was switched on in the standard view or during a
multi-point or continuous measurement can be displayed.
◄
1
Press
several times until the desired value is displayed.
The following are displayed in turn:
Hold: frozen measured value
o
Max: Maximum value
o
Min: Minimum value
o
Current measuring value
o
7.2.2
Resetting maximum/minimum values
The maximum/minimum values of all channels can be reset to the current
reading.
◄
1
Press
several times until Max or Min is shown.
◄
2
Hold down
(approx. 2 s).
All maximum and minimum values are reset to the current reading.
7.2.3
Carrying out multi-point mean calculation
1
Press MODE/END.
www.
7 Using the product
IMPORTANT
Testo-Direct
15
1.888.610.7664
.com