5. Fix the correct position of the probe shaft (9) with screw (11)
and mark (insert probe shaft as far as possible).
6. Slide plastic bracket (2) on the back of the transmitter onto
bracket (3, 4) until it engages.
7. Insert screw (1) through the hole on the top of the instrument
and screw into bracket (3).
8. Insert probe connector (12) into socket until it engages.
4.3.3.
Connecting the instrument
Opening the instrument
1. Loosen screw connection (1) of service flap and open the flap.
Take the weight of the transmitter into account. Ensure that
the brackets (4, 6) are fastened securely.
4 Transmitter
25